Welder World Blog

Posts Tagged ‘Volt’

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

Product Description
This is a factory reconditioned power welder. Reconditioned generally means that the power welder has been returned to the manufacturer, who brings the power welder back to like new condition. Some power welders may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder – WF200000RB

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

Product Description
This is a factory reconditioned power welder. Reconditioned generally means that the power welder has been returned to the manufacturer, who brings the power welder back to like new condition. Some power welders may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder – WF200000RB

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

Product Description
This is a factory reconditioned power welder. Reconditioned generally means that the power welder has been returned to the manufacturer, who brings the power welder back to like new condition. Some power welders may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder – WF200000RB

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

Product Description
This is a factory reconditioned power welder. Reconditioned generally means that the power welder has been returned to the manufacturer, who brings the power welder back to like new condition. Some power welders may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder – WF200000RB

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder

• Weld Steel, Aluminum, Stainless Steel and Cast Iron
• Automatic Thermal Overload Protection
• Tweco type torch with full ON/OFF safety control
• Weld up to 1/4″ in a single pass. With the 30 to 150 Peak Amps
• 6 power setting and Fan cooled

Product Description
Features and Benefits Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Easily changed to Mig welding for stainless steel and aluminum Fan cooled for better performance This wire welder welds up to 1/4" in a single pass.  CSA approved Specs: Input: 230 volt – 60 HZ; 22.5A 1PH Output: 120A @ 20VDC-25% MAX O.C.V.=30VDC MAX 150A 22" x 11.6" x 15.4" Weight: 63 lbs.

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

Product Description
This is a factory reconditioned power welder. Reconditioned generally means that the power welder has been returned to the manufacturer, who brings the power welder back to like new condition. Some power welders may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder – WF200000RB

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder

• Delivers heavy-duty weld power
• Two internal sealed lead-acid batteries can be completely charged 90 minutes
• Can operate while plugged in or completely cordless
• Delivers 180 amp on 115-volt standard power.
• Setup for both self-shielded flux-cored and solid gas-shielded wires

Product Description
The Hobart Trek 180 is the first self-contained MIG welding system for applications off the power grid. Includes two internal sealed lead acid batteries and integrated charger that allow welder to be charged completely in 90 minutes and recharged to 80% in 20 minutes, using a 115V outlet. U.S.A. Volts: 115, Amps: 25 – 180, Duty Cycle: 20% at 120 Amps, Mig Ready: Yes, Voltage + Wirefeed Speed Control: Infinite, 40 – 400 IPM, Weldable Metals: Steel, Weld Thickness (in.): 24-gauge up to 1/4, Clamp Cable Length (ft.): 10, Amps Input at Rated Load, 60hz: 12A, can use extension cord, Shielding Gas Required: No, Welding Wire Diameter (in.): 0.023 – 0.035, Dimensions L x W x H (in.): 13 5/16 x 17 x 7 7/8

Hobart 500539 Trek 180 Battery-Powered or 115-Volt Corded Portable MIG Welder

• Weld Steel, Aluminum, Stainless Steel and Cast Iron
• Automatic Thermal Overload Protection
• Tweco type torch with full ON/OFF safety control
• Weld up to 3/16 in a single pass. With the 30 to 130 Peak Amps
• 4 power setting and Fan cooled

Product Description
The Clarke 110 Volt Arc Welder is the ideal professional welding kit for DIY, home workshops and auto/industrial applications. Easily converts to gas with conversion kit Item# 16472192 (sold separately) for MIG welding. Welds mild steel, aluminum, stainless steel and cast iron. Solid state electronic heat control with larger PC board for better wire speed control. This feature-filled welding kit has a 10-year limited warranty on the transformer and 1-year limited warranty on parts and labor. Volts: 110, Amps: 130, Duty Cycle: 20% @ 130 Amps, Mig Ready: No, requires MIG conversion kit, Wire Feed Speed Control: Yes, Weldable Metals: Steel, stainless steel, and aluminum, Clamp Cable Length (ft.): 5ft. 10in., Regulator and Gas Hose Included: No, Shielding Gas Required: No, Welding Wire Diameter (in.): .023, .030, and .035, Cart: No

Clarke WE6523 130EN 120-Volt Fluxcore/MIG Welder

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

Product Description
This is a factory reconditioned tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder – WF200000RB

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder

• MIG welder handles a wide variety of solid, mild steel or stainless steel, flux cored and aluminum wires
• Operates from 115-volt standard household current;
• Features 4 output voltage settings with wire feed tracking and a purge setting
• Comes ready to use
• Includes a built-in contactor to make wire electrically “cold” when not welding

Product Description
Rugged and portable, the Handler® 140 operates off 110 volt current. Comes ready to weld with or without shielding gas using .030 flux cored wire. For greater versatility, upgrade with the optional MIG Kit. FEATURES: ? Welds 20 gauge up to 1/4″ steel ? 25 -140 amperage output range ? Includes 10′ work cable with clamp and extra 0.030″ contact tips ? Approx. shipping weight: 66 lbs.Amazon.com Product Description
The Handler 140 from Hobart comes ready to weld with or without shielding glass, and it expertly handles a wide variety of solid, mild steel or stainless steel, flux cored and aluminum wires. This handy MIG welder operates from 115-volt standard household current and features four output voltage settings with wire feed tracking and a purge setting, both of which provide quick and easy adjustment for different materials and thickness. The Handler 140 welds 24 gauge up to .25 inch in steel without burning through, and includes both a built-in contactor to make wire electrically “cold” when not welding and self-resetting thermal overload protection for optimum safety.

The proven built-in wire feeder with quick-release drive roll lever ensures reliable operation, and makes it easy to switch between .023 and .025 inches and .030 to .035 inches. This device also offers easy access to polarity changeover, which includes storage holes for spare tips.

Hobart 500500 Handler 140 115-Volt 25-to-140 Amp Gas/Metal/Arc Single-Phase Wire Welding Package