Welder World Blog

Posts Tagged ‘thermal overload protection’

• Weld Steel, Aluminum, Stainless Steel and Cast Iron
• Automatic Thermal Overload Protection
• Tweco type torch with full ON/OFF safety control
• Weld up to 1/4″ in a single pass. With the 30 to 150 Peak Amps
• 6 power setting and Fan cooled

Product Description
Features and Benefits Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Easily changed to Mig welding for stainless steel and aluminum Fan cooled for better performance This wire welder welds up to 1/4" in a single pass.  CSA approved Specs: Input: 230 volt – 60 HZ; 22.5A 1PH Output: 120A @ 20VDC-25% MAX O.C.V.=30VDC MAX 150A 22" x 11.6" x 15.4" Weight: 63 lbs.

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder

• MIG welder handles a wide variety of solid, mild steel or stainless steel, flux cored and aluminum wires
• Operates from 115-volt standard household current;
• Features 4 output voltage settings with wire feed tracking and a purge setting
• Comes ready to use
• Includes a built-in contactor to make wire electrically “cold” when not welding

Product Description
Rugged and portable, the Handler® 140 operates off 110 volt current. Comes ready to weld with or without shielding gas using .030 flux cored wire. For greater versatility, upgrade with the optional MIG Kit. FEATURES: ? Welds 20 gauge up to 1/4″ steel ? 25 -140 amperage output range ? Includes 10′ work cable with clamp and extra 0.030″ contact tips ? Approx. shipping weight: 66 lbs.Amazon.com Product Description
The Handler 140 from Hobart comes ready to weld with or without shielding glass, and it expertly handles a wide variety of solid, mild steel or stainless steel, flux cored and aluminum wires. This handy MIG welder operates from 115-volt standard household current and features four output voltage settings with wire feed tracking and a purge setting, both of which provide quick and easy adjustment for different materials and thickness. The Handler 140 welds 24 gauge up to .25 inch in steel without burning through, and includes both a built-in contactor to make wire electrically “cold” when not welding and self-resetting thermal overload protection for optimum safety.

The proven built-in wire feeder with quick-release drive roll lever ensures reliable operation, and makes it easy to switch between .023 and .025 inches and .030 to .035 inches. This device also offers easy access to polarity changeover, which includes storage holes for spare tips.

Hobart 500500 Handler 140 115-Volt 25-to-140 Amp Gas/Metal/Arc Single-Phase Wire Welding Package

• Includes ground cable with clamp, welding gun, spool of flux cored wire, face shield and brush hammer
• Thermal overaload protection, 80-125 Amps, Duty cycle 20% at 80 Amps
• Wire size: .030-.035, Heating settings: two
• Max metal thickness: 18 guage / 3/16 inch
• For small to medium sized welding jobs around the home, garage or farm, welds all types of carbon steel.

Product Description
mfr: New Buffalo Corp.
• Welds All Types Of Carbon Steel
• For Small To Medium Sized Welding Jobs Around The Home, Garage, Or Farm
• Includes Ground Cable With Clamp, Welding Gun, Spool Of Flux Cored Wire, Face Shield & Brush Hammer

Features
• Thermal Overload Protection
• Amps: 80 (Max 125)
• Duty Cycle 20%@80 AMPS
• Wire Size: .030 – .035
• Heat Settings: Two
• MAX Metal Thickness: 18 Gauge / 3/16″

Pro-Series MMIG125 125 Amp Fluxcore MIG Welder Kit

• Arc stick welder powered by 115-volt current
• Welds mild or stainless steel from 18-gauge to 1/8 inch
• Dual heat setting for use with welding rods
• Automatically shuts off at duty cycle rating
• 5-year limited warranty

Amazon.com Product Description
The Campbell Hausfeld WS0970 115-volt 70 Amp arc stick welder can weld mild or stainless steel from 18-gauge to 1/8-inch thick, and is ideal for use on boat trailers, wrought iron, or automotive sheet metal. It comes with a dual heat setting for use with welding rods, and its thermal overload protection automatically shuts off the welder at its duty cycle rating. A contoured face makes operating the arc welder easy, as do the carry handle and storage clips to hold the cables in place. The Campbell Hausfeld WS0970 welder is powered by a 115-volt current and generates 70 Amps of power. A built-in storage keeps accessories organized while cord management maintains secure storage. This welder includes a welding shield, hammer/brush, electrodes, and quick start guide. Campbell Hausfeld backs its welder with a 5-year limited warranty.

What’s in the Box
Welder, welding shield, hammer/brush, electrodes, and quick start guide.

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder

Forney 95FI – #00304 Ready to weld right out of the box! Welds all types of carbon steel. Simple to operate and portable, weighs just 43 pounds. Two power settings for accurate welding control. Convenient 120V input power. Automatic thermal overload protection. Electronic wire speed control. Tweco® compatible welding torch. Includes face shield, combination chipping hammer & brush, welding torch, ground clamp, and starter roll of flux cored welding wire. Tough, scratch resistant cabinet. Main Votlage: 120V Max. OCV: 27V DC Duty Cycle: 20% @ 60 Amps Output Range: 20 Amps – 95 Amps Wire Diameter: .030, .035″ Weight: 43 lbs Welds up to 3/16″ material