Welder World Blog

Posts Tagged ‘stainless’

Welding Stainless Steel header. Crack repair on a Honda stainless header

Natural Granite Stone, Granite Slabs, Granite Tiles

Everybody would like to have a good interior, whether it is home or office. A touch of natural granite stone can enhance the look of interiors as well as exteriors. Natural granite stone is durable and elegant as well as signals luxury of life. Natural granite stone when used on floors look shining and enhance the look of the room. Granite stone is an ideal material which can be used in your home like kitchen countertops, floors etc. Granite stone pavers are demanded in the national as well as international market.You can also choose granite kerb stone for unmatched finish available in various sizes and dimensions. Granite stone kitchen countertops are fire resistant, scratch resistant, frost resistant, slip resistant and can hold too much pressure. Granite countertops in kitchen can make it look very luxurious. One of the most beautiful options of kitchen countertops are granite slabs. Choosing granite slabs for kitchens is an intelligent decision because granite slabs are very versatile when it comes to design and are also very durable. Numerous colors in granite slabs are available and so you have wide choice for the color you want for your interiors. Apart from kitchen countertops, granite slabs and granite tiles are also used in staircases, Jacuzzis, swimming pools, barbeques, fireplace, flooring, bathroom tiling etc.  The most common use of granite tiles is the flooring. Granite tiles are available in huge range of designs with different textures and colors because the suppliers of granite tiles use lot of R&D techniques in manufacturing of granite tiles. Granite tiles are therefore used in one of the most impressive manner all over the world.

Teak Wood

Teak Wood has been most wanted furniture since generations. Teak wood furniture is very durable and that is the reason why people choose it for their interiors and exteriors. Teak wood contains very large percentage silica and natural oils. Teak wood furniture is commonly used in decking of ships or home because it is a very dense wood. Teak wood is very durable, only it needs to be cleaned off periodically to maintain it. Teak wood is heavy in demand but with a limited recurring supply because it takes approximately 50 to 60 years to grow to maturity. There are many exporters of teak wood from India, supplying high quality teak wood logs. The providers of teak wood also provide timber teak wood in all cut sizes as per the specific requirements.

Stainless Steel Sink

Stainless steel sinks are used in both contemporary and traditional kitchens. Sinks made of stainless steel are durable and are famous for their clean look. Stainless steel sink matches to any type of kitchen countertop, so it is beneficial to install the stainless steel sink in the kitchen. The special features of stainless steel sink is that they look professional, sleek, hygienic and are convenient to maintain and hygienic. The price of the stainless steel sinks is determined by the brand, dimensions and type of finish. There are many types of stainless steel sinks available like single sink, double sink bowl, three sink bowl, single sink with garbage etc. There are many suppliers of stainless steel sinks in India, you can buy a stainless steel sink suiting to your kitchen design.

Granite Stone Supplier, Teak Wood Supplier, Stainless Steel Sink Supplier

Shiva International is one of the best suppliers of granite stone, teak wood, stainless steel in Karnataka. Since 1998, Shiva International has been successfully catering to the industrial and domestic sectors by providing Granite Stone, Granite Slabs & Tiles, Stainless Steel Designer Kitchen Sinks etc. So, if you are in need of high quality granite stone, granite slabs, teak wood, stainless steel kitchen sinks etc. visit http://www.shivaintl.net for further details.

Classifications of Stainless Steel Wire Rods :

Standards – Austenitic : KS(STS), 202/M, 303/F
Standards – Austenitic : JIS(SUS)v, 202/M, 303/F
Standards – Austenitic : AISI, 202, 303
Standards – Austenitic : DIN, 1.4371, 1.4305

Application of Stainless Steel Wire Rods :

springs, bolts, nuts, shafts, chemical, coal, and oil plant equipment etc.

About Our Company :

Jayant Steel India takes pleasure in introducing ourselves as one of the leading stainless steel manufacturers, stainless steel exporters, stainless steel importers and stainless steel suppliers of all types of ferrous & non-ferrous metals, especially aisi Stainless Steel 304, Stainless Steel 304l, Stainless Steel 316, Stainless Steel 316l, Stainless Steel 321, Stainless Steel 410, Stainless Steel 420, Stainless Steel 431 and other percentages items namely hastalloy, monel, nickel, titanium & others, basically in all sizes and shapes such as stainless steel sheets, stainless steel plates, stainless steel flats, stainless steel rods, stainless steel circles, stainless steel pipes & pipes fittings, flange fitting & others.

We are quality manufacturers and exporters of “Stainless Steel Pipes, Stainless Steel Pipe Fittings, Dairy Fittings, Compressor Fittings (Double Ferrule Fittings), Flanges & Flange Fittings”. The above mention material is manufactured in : “Stainless Steel Material Products, Hastalloy Material, Monel Material, Nickel Material, Titanium Material, M.S, Carbon Steel Material And Alloy Steel Material”. We store the above items in huge quantity and supply the same regularly to reputed private and public sector to their entire satisfaction. We are also highly specialized in executing orders in all aspects of project implementation, maintenance, modernization and shutdown application etc.

Quality Assurance System :

Strict quality assurance system is being followed in all our departments and total quality management is applied to streamline and all the procedures and practices in operation to achieve high standard of efficiency. Continuous efforts are being made for improvement of materials technology and equipments to give best quality products at the most affordable prices.

For more information on Stainless Steel Wire Rods, kindly visit :
http://www.jayantsteel.com/pro_ssteel.html

Company Website : http://www.jayantsteel.com

—————

The standard welding processes such as TIG, MIG, and stick can be used to weld carbon steel pipe to stainless steel pipe. Standard carbon E-class welding electrodes such as  E70 and 7018 can be used for MIG and stick welding respectively. However, using such welding electrodes on this type of welding, the welding quality may be compromised due to lack of chromium and nickel in the alloy. Hence, it is important to use high-carbon stainless steel electrodes to have a strong weld joint between the steel and stainless pipes. In particular, type 309 welding electrodes have the correct composition ensuring a proper weld with correct penetration and structural integrity. Similarly, the following steps must be used in this type of welding:

Step-1: Load or spool the MIG welding machine with the type 309 welding wire after removing already loaded welding wire used for other jobs.

Step-2: Replace the gas with the three part shielding gas mixture. It is necessary to mix the gas thoroughly before attaching the gas bottle to the MIG welder. The method used is to place the gas bottle on the floor horizontally roll it back and forth to mix the gas thoroughly. After that fix gas gauges to the three-part gas bottle.

Step-2: Now switch on the MIG welder and adjust the correct heat and wire speed levels. It is essential to note that the standard heat settings (used for carbon steel) will not be adequate for welding stainless steel as higher amount of heat is required to weld stainless steel. Best advise is to refer your welding guide to verify the initial test setting for your heat and wire speed. Once you adjust the heat levels, carry out a test pass with the welder to see that the settings are correct.

Step-3: Cut a piece of stainless steel pipe and a piece of carbon steel pipe with required lengths using a band saw. It is important to note that when cutting stainless steel using a band saw, reduce the speed and at the same time use cutting fluid to keep the band saw blade cool.

Step-4: You need to have 20-degree bevel on end of the cut pieces of pipe. This is done using a grinder by holding it at a constant 20 degrees to give you an even fill line. Make sure not to touch the grinding pipes because the pipe will get very hot during grinding.

Step-5: Once the pipe edges are grounded correctly, place one beveled end of the steel pipe against the beveled end of the stainless steel pipe allowing a welding gap about 1/16th of an inch between the two pieces of pipe. Then place a tack at the weld joint to keep the pipes together. Similarly, roll the pipes and provide a tack at one inch interval around the entire circumference of the pipe. ItÕs necessary to maintain the 1/16th inch weld gap right through out the circumference.

Step-6: Now start welding the pipes together. Start the weld from the stainless steel pipe and gradually pull the puddle onto the carbon steel pipe. Also, roll the MIG gun in a circle to flow the puddle to create good weld while watching the bottom of the weld to make sure proper penetration. During the welding process, if you note that the carbon pipe is under-cutting, it is necessary to reduce the heat on the MIG welder and repeat it.

Related Welding Bottles Articles

Rajendra industrial ,Premiumm Suppliers & Exporters of decoration stainless steel sheet,designer stainless steel sheet,etched designer stainless steel

We are the whole suppliers & exporters of aluminum products, brass products, copper products, decoration stainless steel sheet, designer stainless steel sheet, etched designer stainless steel sheet, designer stainless steel sheet, industrial metal products, stainless steel sheet,aliuminium products exporters, brass product exporters, copper product exporters, decoration stainless steel sheet exporters, designer stainless steel sheet exporters

Established in the year 2000, Rajendra Industrial Suppliers is a well known venture engaged in supplying/distributing a comprehensive range of Industrial Raw Materials. Our range includes Aluminum Alloys, Brass Rods, Spark Erosion Copper, Stainless Steel Pipes and Stainless Steel Strips,Etched Designer Stainless Steel Sheet.

We have devised a manufacture selection procedure to check the financial standing and market reputation of the manufacturers.We only deal with manufacturers who confirm to IS and BS standards. Owing to features like durable and high tensile strength, these have been fulfilling the requirements of a number of government, semi government bodies, public limited companies, MNC, defence and their ancillaries.

Our spacious warehouse, stringent quality testing facility and a wide distribution network facilitate the delivery of consignments of our clients within the promised time period. We follow ethical and fair business practices, which has earned us the trust and confidence of our clients.

With the assistance of our knowledgeable team, we are in touch with the most credible manufacturers and ensuring complete client satisfaction. Our warehouse personnel ensure the safety of our range

Find More Stainless Steel Sheet Articles

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date plus stopwatch second hand, central minute, second and 12-hour chronograph sub-dials plus 2 additional time zone dials
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
MOVEMENTS: Miyota FS10 / 2033 / 5Y20 CASE: steel; AISI 316 L IP Black treatment Diameter: 53 mm. DIAL: black; silver or red Spheres and index black; silver or red WATER RESISTA NT: 10 ATM STRAP: rubber black.Amazon.com Product Description
Be the most stylish man in three time zones when you wear the Welder Men’s K29 Triple Time-Zone Chronograph Black Ion-Plated Stainless Steel Watch. The black three dimensional dial has eleven-hand movement to tell time on three separate clocks. The largest clock has red Arabic numerals at eight and 10 o’clock and subdials to track seconds, minutes, and hours. The second clock has numerals at three and 12 o’clock, and the third display has red numerals at two and four o’clock. Mineral crystal keeps the modern display from scratching, and five crowns control all of your three time zone functions. The black bezel and case are cast in durable ion-plated stainless steel, and Welder has added interchangeable black leather and rubber wristbands for extra style. The watch is presented in Welder’s trademark water-tight black suitcase and is water resistant to 330 feet (100 meters).

Welder Men’s K29-8002 K29 Triple Time-Zone Chronograph Black Ion-Plated Stainless Steel Watch

Product Description
Welding Metallurgy and Weldability of Stainless Steels, the first book in over twenty years to address welding metallurgy and weldability issues associated with stainless steel, offers the most up-to-date and comprehensive treatment of these topics currently available. The authors emphasize fundamental metallurgical principles governing microstructure evolution and property development of stainless steels, including martensistic, ferric, austenitic, duplex, and precipitation hardening grades. They present a logical and well-organized look at the history, evolution, and primary uses of each stainless steel, including detailed descriptions of the associated weldability issues.

Welding Metallurgy and Weldability of Stainless Steels

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date plus stopwatch second hand, central minute and 12-hour chronograph sub-dials
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
Movement: OS10 Miyota Chronograph Case: Steel; AISI 316L; IPB Treatment Case Dimensions: Approx. 48mm diameter; approx. 60mm width with crown Mineral Crystal Black Dial with Red Accents Date Display Water resistant: 5 ATM Bands: 2; Black Calf Leather; & Black Rubber Guarantee: 2 years worldwideAmazon.com Product Description
People will want to take a closer look at the contrasting style and unique design of Welder Men’s K24 Chronograph Black Ion-Plated Stainless Steel Round Watch. Black ion-plated stainless steel makes up the large case and round bezel, featuring a wide-handled stem on the left side of the case. Two easy-push buttons work the time, date, and the stopwatch featured in a small subdial on the face. The dial contains multiple black pieces at various depths, showcasing the thick red hour, minute, and second hands ticking in the middle. Large red Arabic numerals stand at the two, four, eight, and 10 o’clock, while small silver screws dot the three, six, nine, and 12 o’clock hours on top of small numerals at every five minutes. Small numerals sit in five-minute intervals. A subdial sits just below the hands for the stopwatch, and a small calendar display curves by a line of minute marks next to the nine o’clock hour. There are two band options: one of black rubber with a deployment clasp, and one of black leather that closes with a silver buckle. This original timepiece boasts the reliability of Japanese quartz movement and is water resistant up to 330 feet (100 meters).

Welder Men’s K24-3303 K24 Chronograph Black Ion-Plated Stainless Steel Round Watch

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date plus stopwatch second hand, central minute and 12-hour chronograph sub-dials
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
Movement: OS10 Miyota Chronograph Case: Steel; AISI 316L Case Dimensions: Approx. 48mm diameter; approx. 60mm width with crown Mineral Crystal Black Dial with White Accents Date Display Water resistant: 5 ATM Bands: 2; Black Calf Leather; & Black Rubber Guarantee: 2 years worldwide

Welder Men’s K24-3200 K24 Chronograph Stainless Steel Round Watch

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date function
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
Movement: 2115 Miyota Case: Steel; AISI 316L; IPB Treatment Case Dimensions: Approx. 48mm diameter; approx. 60mm width with crown Mineral Crystal Black Dial with Green Accents Date Display Water resistant: 5 ATM Bands: 2; Black Calf Leather; & Black Rubber Guarantee: 2 years worldwide

Welder Men’s K24 Analog Black Ion-Plated Stainless Steel Round Watch #K24-3102