Welder World Blog

Posts Tagged ‘spool’

• Spool Gun welder that you can weld up to 20′ away from the welder
• Exclusive wire speed control from the Spool Gun
• 4 heat settings on the welder
• Fluxcore/MIG, Easily changes from Fluxcore wire to Gas shielded wire by moving 2 wires no tools required. You will need to purchase a MIG regulator.
• Welds Steel, Stainless Steel, Aluminum and Cast Iron

Product Description
This portable and lightweight welder offers maximum mobility for use on ladders, under vehicles or on equipment. High-tech spool gun design allows precise wire speed control, even when 20 feet away from unit. Easily changes from fluxcore to gas shielded welding with optional regulator. Includes 200 Amp ground clamp and 1/2-lb. spool of .030 fluxcore wire. 2-year limited warranty; 10-year limited warranty on transformer. Volts: 120, Amps: 130, Duty Cycle: 40% @ 60 Amps, Mig Ready: No, requires optional regulator, Wire Feed Speed Control: Yes, Weldable Metals: Steel, stainless steel, and aluminum, Weld Thickness (in.): Up to 1/4in. steel, Regulator and Gas Hose Included: No, Shielding Gas Required: No, Cart: No

Clarke WE6441 135SG Fluxcore/MIG Spool Gun Welder

• Great for Aluminum MIG Welding with the Handler 210
• Available in an economical 10 ft version or in a 20 ft version that provides extended reach.
• Usable on 16 gauge (1.6 mm) up to 1/4 in (6.3 mm) aluminum with the Handler 210.

Product Description
The Hobart DP-3035-10 Spoolgun is designed for use with the Hobart Handler 210 MIG Welder, Item# 1646189. Application: Spoolgun, Works With: Hobart Handler 210 MIG welder, Weld Thickness (in.): 1/4, Cable Length (ft.): 10

Hobart 300199 DP-3035 Direct Plug-In Spool Guns For Use With Handler 210 MIG Welder

• Excellent for use with small constant current wire feeders which are lightweight
• Fabrication and repair of lightweight structural steel, trailers, tanks, hoppers and machinery parts
• Excellent for use on fillet and lap welds on thin gauge steel where burn through is a problem with other wires and electrodes
• Ideal to use in drafty or windy conditions where gas shielded wires cannot be used

Product Description
For gasless welding. With smooth, clean surface required for efficient wire feed. Minimal splatter, easy slag cleanup.

US Forge Welding Flux-Cored MIG Wire .035 2-Pound Spool #00072

does it matter as long as it has the hook ups for the welder? also i am not sure if i will need to use the control box.
so if my welder doesn’t have the plug in i will need to buy a control box? or could i use the car battery set up, or does that only work on steel?