Posts Tagged ‘Single’
JB Weld Cold Weld Epoxy Single Pack FREE SHIPPING
- J-B WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted
- J-B WELD is super strong, non-toxic, and safe to use
Product Description
J-B WELD is the world’s finest cold-weld compound. It’s a remarkably easy, convenient, and inexpensive alternative to welding, soldering, and brazing. J-B WELD is the smart way to repair something … and for literally pennies per use. When welding or soldering is out of the question due to cost, down time for repairs, or technical/environmental considerations, J-B WELD is the answer.
How does it work?
J-B WELD is packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel — and with similar properties.
How to use it:
Use J-B WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply J-B WELD, and let it cure. That’s all there is to it!
Like metal, J-B WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It’s water-proof; petroleum, chemical, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. J-B WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.
What does it bond to?
Virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper — just about any porous and non-porous material.
JB Weld has virtually thousands of uses!
Posted in Weld | 
Tags: Blogs, Cold, copper aluminum brass, electrical insulator, Epoxy, F. J-B, Free, Pack, SHIPPING, shock vibration, Single, Steel, Stuart, Weld | 
No Comments »
Speedway Series 7117 125 Amp 110 Volt Single Phase Wire Feed Flux Welder
- Self regulating feed control
- Thermal protection with warning light
- Input: 110volt, single phase
- Wire capacity: 0.035″ or 0.030″
- No Gas Needed
Product Description
This flux core welder handles .023, .030 and .035in. wires and welds 18-gauge to 3/16in. steel. Self-regulating feed control; wire feed speed 0-400 IPM. Duty cycle: 10% @ 90 Amp, 19V; thermal protection with warning light.
Speedway Series 7117 125 Amp 110 Volt Single Phase Wire Feed Flux Welder
