Welder World Blog

Posts Tagged ‘SAFETY’

Using a cutting torch is serious stuff. Its pretty Safe when used properly, but not safe at all when not used properly. This is not a comprehensive oxyfuel safety course by any means but I tried to include most of the main things

Welding is a procedure that involves joining two materials together. It has been in usage right from the Bronze and the Iron ages. Over the years, welding has become much more than a mere forging process and today uses lasers and other gadgets to achieve the purpose of joining materials.

In today’s times welding no longer remains a profession that is chosen by unskilled people. It is a major profession as without welding, even routine equipments would become impossible to use. In fact, the profession has become so well-known that there is an entire university dedicated to teaching people about the various requirements of welding. The Hobart Institute of Welding Technology, based in Ohio, US was started in 1930 and still is the leading institute in terms of the career choice. The institute provides not just training but also teaches its students the aspect of safety while carrying out welding.

In terms of safety and carrying out the process of welding the primary requirement is that of the availability of good welding supplies. Welding is not a simple and easy process. It requires lots of primary inputs. One of the most important inputs is power. Welding is impossible without power to generate the welding. This is why welding generators are highly powered so that there is no time wasted while carrying out the process. The amount of power required to operate a welding machine is over 80 amps.

Other welding suppliesinclude welding pipes, welding positioners – to hold the equipment properly and the pipe bully. Pipe bully is mainly used to rotate the welding pipes so that the equipment does not slip and the welder does not encounter any loss to the welding material or to himself.

There are many companies that deal in distributing quality welding supplies. For example the pipe bully that is marketed by All-Fab Corporation. The Welding Supply Guide offers premium welding supplies to its clients based in the United States and Canada. In fact, in the United Kingdom there is a firm that provides welding supplies to its clients through the medium of internet so that both time and energy can be conserved.

With the help of the right welding supplies, welding professionals can ensure perfect delivery of the job carried out. Also considering the risk involved in the career, these professionals also end up ensuring safety of not just themselves but also of other people who might be around.

Anyone who does MIG welding has to follow basic MIG welding safety practices. This will help to ensure that both the welder and those around them are not injured or even killed while work is being done. While every welder knows that welding creates sparks made of molten metal, intense heat, and light bright enough to damage eyesight, many welders forget the basic safety rules and end up injured. Part of MIG welding safety is to remain completely aware of the area around you and to take every precaution to protect yourself, people who are nearby, and the property that is in the worksite. Another thing to remember is that if you work too near another welder, a dangerous situation can occur.

Eye protection is extremely important when welding. The light that welding produces is very bright and potentially harmful. If you look at the welding arc when you are not wearing the proper eye protection you can suffer burns to your eyes, flash burns, and while it can be treated, permanent eye damage can happen after repeated occurrences. In order to protect workers permanent booths or portable partitions should be used and the light needs to be kept contained. Anyone welding or observing must wear protective eyewear.

The proper attire is also needed. Welding sparks are extremely hot and will burn through most fabrics or even ignite them. The electric arc can burn exposed skin because it produces infrared and ultraviolet rays. The proper clothing is sleeves, leather capes, and gloves. Your clothing should always be kept free of grease, oil, and any other flammable material to avoid having your clothes catch on fire while you are working. Your shoes should be high top leather boots or shoes. Never wear athletic or any shoes made of fabric because of the risk of burns.

Be aware of any water in the area you are working in because you are working with electricity. Water is able to conduct electricity from the point you’re welding to any other place it touches, even you. The equipment should be kept dry and never placed near or in water. If at all possible keep the welding area dry. If there is no way to avoid water, then stand on a dry rubber mat or a dry wooden board. Your clothing needs to be dry and if you sweat, change clothes as often as you can.

The welding equipment needs to be well maintained so that it’s safe and efficient. Electricity will always follow the path of least resistance and poor connections or cables that are frayed can created secondary circuits, leading the electricity to places you don’t want it to go. Always make sure that the electrical connections are secure and tight. Cables that are damaged or frayed should be immediately replaced.

Be aware of any flammable materials in the area you’re welding in. The sparks can cause fires. Oxygen should never be used for blowing off clothing or equipment because of the possibilities of explosions. Pressurized containers or those that have held flammable materials need to be treated with extra caution. Always follow procedure for making sure it is safe to weld.

Proper ventilation is essential. Smoke as well as fumes can be given off from the materials you are working on and can cause different reactions that range from irritation to death. Shielding gases can actually build up and suffocate a welder. You may need to wear air masks or even breathing equipment.

The contents of cylinders are under high pressure, and present a danger of explosion. Protect them from heat of any kind and never weld on them. Protector caps must always be on to avoid damaging the valves because a damaged valve can release the pressure and turn the cylinder into a rocket. Fasten cylinders to a wall, cart, or rack and move them in upright positions.

Oskars complete line of welding booths are designed to meet your space and welding requirements. For almost any budget, the welding booths can be installed to filter or extract harmful air impurities. Oskar builds around your specifications.
Video Rating: 0 / 5

Wear long sleeves & pants, plus full shoes, & at least a helmet.

If I’m doing overhead welding, I’ll put on my leather jacket too. I ALWAYS wear long sleeves. I ALWAYS wear the helmet for welding or the goggles for torch work.

Wearing short sleeves will get you sunburned. Not wearing gloves can get your hands burned or sunburned. Yes I’ve tried it during real hot weather, & the sunburn is for REAL.

If you wear boots, don’t tuck your pants inside! One of my welder helpers did & he soon went DANCING around due to the hot sparks. We both laughed about it later, but it wasn’t funny at the time.

Got long hair? You better keep it back or cut it shorter. The guy mentioned above had fairly long hair at one time. Then he caught it on fire while doing torch work. Hair can burn REALLY fast. He came to work the next day with a lot shorter hair!

Doing some necessary work in wet conditions? Try to build a temporary shelter, or make sure you have on DRY gloves, etc. If conditions are wet enough, get some rubber WELDING gloves.

Protective clothing is a MAJOR part of Welding Safety!

Fire Safety:

I don’t start welding until I have at LEAST a bucket of water nearby. It’s good to also have a water hose & any pressurized fire fighting equipment if you have them.

Learn to know the SMELL of burning clothing & other items around the job. Have a “helper” around to watch for fires when possible. Learn to pay attention to unusual LIGHT flickering in your side vision. You may even HEAR a burning sound besides the arc sounds.

Sooner or later, something will catch fire. Catch it before it gets out of hand. People everywhere, everyday, weld by themselves. Don’t, unless you don’t have a choice.

When it comes to Welding Safety, PREVENTION SAVES PAIN!
Arc welding safety with your equipment:

1) Skin burns: Simple. Wear clothing wherever you don’t want to get burned. The ARC is hot, & the metal you’re working on is too. If you feel your leather glove getting hot, let go of the metal & remove the glove! It WILL get hotter.

Welding sparks can set your clothing on fire. It can be burning BEFORE you smell it. Keep checking yourself & your surroundings.

Metal you’ve just welded will STAY hot for awhile. Use your gloves to move it.

2) Ventilation: Open the garage door, turn on a fan, & keep “up-wind” of the fumes. Don’t weld forever without taking breaks & getting to fresh air.

3) Shocks: Start your weld on the same side of the material where the ground clamp is. It will start easier & you won’t become part of the electrical path. Use DRY GLOVES, & try to not work in wet areas.

If you MUST work in wet areas, you can use rubber WELDING gloves. They are very heavy duty. If you’re stick welding (versus wire welding), you may get a jolt when you insert the rod into the holder with wet leather gloves.

4) “Flash burns”: Even looking at the sun for a second or so can HURT. If you see the arc directly without protection for long, you will have the equivalent of sun-burned EYES! If you don’t get it too bad, it will go away shortly.

If you get “flashed” very much it will hurt for a long time. I got it bad once & had to go to a doctor to get medicine to put in my eyes. It was called “pontocaine”. It worked INSTANTLY, & what a relief!

Also, be kind to those around you & tell them to “watch their eyes”. When I was still new to welding, they called me “Lightning” because I wasn’t warning them before striking an arc.

You need to read these WELDING SAFETY DETAILS more than once!

Torch safety

1) The cutting torch & related equipment can be dangerous. First, SECURE the tanks to a wall or build a cart for them & keep the chain across them. A fellow worker told me about the time he saw an oxygen tank fall & break the top valve assembly off. Then it went flying literally through the roof!

Remember, there’s up to 2000 PSI in the O2 tanks. Again, keep the tanks secure. PLUS if you’re replacing them, make sure the cap is on the full one.

2) Once you have a flame going, you will get an INSTANT BURN if you run that flame across your hand! After you make a cut, the metal will stay HOT for quite awhile. Use gloves to handle work in-progress.

3) Welders are really “Special Mechanics”, & we all get greasy. You don’t want grease catching fire. It’s extra hard to get “out”. Clean up wherever you can. A trick a mechanic friend of mine showed me, was to use margarine for my dirty hands. Use it just like you would waterless cleaners. It works really good.

Just take a teaspoon (or tablespoon) full, and work it till it’s liquid, then rub it around the grime, then wipe it off with paper towels. (THEN go in the house & use regular soap to get the margarine off). Your wife will love you for not coming in totally greasy!

4) Keep all fittings tight. If the “gas” fittings are loose enough, it could catch fire AT that fitting.

5) Don’t lay the acetylene tank flat for transport, because it could become explosive the next time you turn it on & light it up.

6) When opening the acetylene tank valve, just turn it 1/2 turn. It makes everything safer.

7) Use goggles to cut or weld. Yes there are those that don’t, but I hope it won’t be YOU!

Keep your goggle lenses clean. I use my leather gloves to do that, & leather works just fine.

9) If you’re “setting the flame”, & the “gas” separates from the tip, just back off the “gas” valve a bit.

10) If your hear a buzzing, sucking noise, immediately turn the “gas” valve off, then the O2. It may be backing up into the hoses & could be a bad thing.

11) Check the whole area before you cut. Clear out gas cans, etc. And look for items that might catch fire. Also, bring out the water buckets, water hoses, & other pressurized fire fighting equipment. And have someone nearby, if possible to be the “fire-watch”.

12) “Crack open” the main tank valves before you hook them to hoses to make sure there’s no contamination.

13) Don’t tuck in your pant legs, or you’ll be dancing & jumping around if enough sparks get inside the boots! I’ve seen a fellow welder doing exactly that.

14) Break out your steel-toed shoes if you’re going to do any heavy cutting. One day I just happened to look down & noticed a DENT in my shoe toe. I didn’t even know it happened until I SAW it.

The next time you start a welding project, think to yourself, ” What have I told my buddy helping me about Welding Safety?”

Equipment Gone Bad:

Note that some equipment failures can be just “a pain”, but others might be a safety problem. Try to keep your equipment clean & working right:

1) If your arc welder overheats too much it could either be a “goner”, or even cause it to start smoking internally. Pay attention to “duty cycle”, especially if your machine has no cooling fan or a warning mechanism: a warning light or an automatic breaker.

I was welding along at home & noticed that the rod was sticking a lot to the work-piece. And I noticed that it SOUNDED different suddenly. I soon realized that my cooling fan had died. I replaced it, & it’s been working fine for years now.

2) Can’t see what you’re doing very well? Check your lenses & clean them on both sides (use your leather glove).

3) The circuit breaker kicking off? Maybe you need to go to a bigger breaker. Plus you might have to use a smaller rod & make more “passes”.

4) Is your helmet lens getting messed up from hot sparks? Add a protective cover lens (they are cheaper than your main lens).

5) Is the torch doing excessive splattering? You may be getting the tip too close to the puddle, or the cut. Or you might just need to use tip cleaners (or have both problems).

6) Is your torch not cutting very well? If you have the smaller (& cheaper) single stage gauges, you might try cranking up the cutting pressure again. This was going on for my single stage outfit, & I just assumed I was real low on acetylene.

But when I shut off the tanks later, I saw that the O2 cutting pressure reading was still at 20 PSI. So I was only using 20 PSI to cut instead of 40! I pulled the gauge’s needle off & re-set it. It was good to go again.

Welding Safety includes safe equipment and safe usage!

Welding Safety MEANS safety for you AND your customer AND those helping you!!

Related Welding Lenses Articles

Wear long sleeves & pants, plus full shoes, & at least a helmet.

If I’m doing overhead welding, I’ll put on my leather jacket too. I ALWAYS wear long sleeves. I ALWAYS wear the helmet for welding or the goggles for torch work.

Wearing short sleeves will get you sunburned. Not wearing gloves can get your hands burned or sunburned. Yes I’ve tried it during real hot weather, & the sunburn is for REAL.

If you wear boots, don’t tuck your pants inside! One of my welder helpers did & he soon went DANCING around due to the hot sparks. We both laughed about it later, but it wasn’t funny at the time.

Got long hair? You better keep it back or cut it shorter. The guy mentioned above had fairly long hair at one time. Then he caught it on fire while doing torch work. Hair can burn REALLY fast. He came to work the next day with a lot shorter hair!

Doing some necessary work in wet conditions? Try to build a temporary shelter, or make sure you have on DRY gloves, etc. If conditions are wet enough, get some rubber WELDING gloves.

Protective clothing is a MAJOR part of Welding Safety!

Fire Safety:

I don’t start welding until I have at LEAST a bucket of water nearby. It’s good to also have a water hose & any pressurized fire fighting equipment if you have them.

Learn to know the SMELL of burning clothing & other items around the job. Have a “helper” around to watch for fires when possible. Learn to pay attention to unusual LIGHT flickering in your side vision. You may even HEAR a burning sound besides the arc sounds.

Sooner or later, something will catch fire. Catch it before it gets out of hand. People everywhere, everyday, weld by themselves. Don’t, unless you don’t have a choice.

When it comes to Welding Safety, PREVENTION SAVES PAIN!
Arc welding safety with your equipment:

1) Skin burns: Simple. Wear clothing wherever you don’t want to get burned. The ARC is hot, & the metal you’re working on is too. If you feel your leather glove getting hot, let go of the metal & remove the glove! It WILL get hotter.

Welding sparks can set your clothing on fire. It can be burning BEFORE you smell it. Keep checking yourself & your surroundings.

Metal you’ve just welded will STAY hot for awhile. Use your gloves to move it.

2) Ventilation: Open the garage door, turn on a fan, & keep “up-wind” of the fumes. Don’t weld forever without taking breaks & getting to fresh air.

3) Shocks: Start your weld on the same side of the material where the ground clamp is. It will start easier & you won’t become part of the electrical path. Use DRY GLOVES, & try to not work in wet areas.

If you MUST work in wet areas, you can use rubber WELDING gloves. They are very heavy duty. If you’re stick welding (versus wire welding), you may get a jolt when you insert the rod into the holder with wet leather gloves.

4) “Flash burns”: Even looking at the sun for a second or so can HURT. If you see the arc directly without protection for long, you will have the equivalent of sun-burned EYES! If you don’t get it too bad, it will go away shortly.

If you get “flashed” very much it will hurt for a long time. I got it bad once & had to go to a doctor to get medicine to put in my eyes. It was called “pontocaine”. It worked INSTANTLY, & what a relief!

Also, be kind to those around you & tell them to “watch their eyes”. When I was still new to welding, they called me “Lightning” because I wasn’t warning them before striking an arc.

You need to read these WELDING SAFETY DETAILS more than once!

Torch safety

1) The cutting torch & related equipment can be dangerous. First, SECURE the tanks to a wall or build a cart for them & keep the chain across them. A fellow worker told me about the time he saw an oxygen tank fall & break the top valve assembly off. Then it went flying literally through the roof!

Remember, there’s up to 2000 PSI in the O2 tanks. Again, keep the tanks secure. PLUS if you’re replacing them, make sure the cap is on the full one.

2) Once you have a flame going, you will get an INSTANT BURN if you run that flame across your hand! After you make a cut, the metal will stay HOT for quite awhile. Use gloves to handle work in-progress.

3) Welders are really “Special Mechanics”, & we all get greasy. You don’t want grease catching fire. It’s extra hard to get “out”. Clean up wherever you can. A trick a mechanic friend of mine showed me, was to use margarine for my dirty hands. Use it just like you would waterless cleaners. It works really good.

Just take a teaspoon (or tablespoon) full, and work it till it’s liquid, then rub it around the grime, then wipe it off with paper towels. (THEN go in the house & use regular soap to get the margarine off). Your wife will love you for not coming in totally greasy!

4) Keep all fittings tight. If the “gas” fittings are loose enough, it could catch fire AT that fitting.

5) Don’t lay the acetylene tank flat for transport, because it could become explosive the next time you turn it on & light it up.

6) When opening the acetylene tank valve, just turn it 1/2 turn. It makes everything safer.

7) Use goggles to cut or weld. Yes there are those that don’t, but I hope it won’t be YOU!

Keep your goggle lenses clean. I use my leather gloves to do that, & leather works just fine.

9) If you’re “setting the flame”, & the “gas” separates from the tip, just back off the “gas” valve a bit.

10) If your hear a buzzing, sucking noise, immediately turn the “gas” valve off, then the O2. It may be backing up into the hoses & could be a bad thing.

11) Check the whole area before you cut. Clear out gas cans, etc. And look for items that might catch fire. Also, bring out the water buckets, water hoses, & other pressurized fire fighting equipment. And have someone nearby, if possible to be the “fire-watch”.

12) “Crack open” the main tank valves before you hook them to hoses to make sure there’s no contamination.

13) Don’t tuck in your pant legs, or you’ll be dancing & jumping around if enough sparks get inside the boots! I’ve seen a fellow welder doing exactly that.

14) Break out your steel-toed shoes if you’re going to do any heavy cutting. One day I just happened to look down & noticed a DENT in my shoe toe. I didn’t even know it happened until I SAW it.

The next time you start a welding project, think to yourself, ” What have I told my buddy helping me about Welding Safety?”

Equipment Gone Bad:

Note that some equipment failures can be just “a pain”, but others might be a safety problem. Try to keep your equipment clean & working right:

1) If your arc welder overheats too much it could either be a “goner”, or even cause it to start smoking internally. Pay attention to “duty cycle”, especially if your machine has no cooling fan or a warning mechanism: a warning light or an automatic breaker.

I was welding along at home & noticed that the rod was sticking a lot to the work-piece. And I noticed that it SOUNDED different suddenly. I soon realized that my cooling fan had died. I replaced it, & it’s been working fine for years now.

2) Can’t see what you’re doing very well? Check your lenses & clean them on both sides (use your leather glove).

3) The circuit breaker kicking off? Maybe you need to go to a bigger breaker. Plus you might have to use a smaller rod & make more “passes”.

4) Is your helmet lens getting messed up from hot sparks? Add a protective cover lens (they are cheaper than your main lens).

5) Is the torch doing excessive splattering? You may be getting the tip too close to the puddle, or the cut. Or you might just need to use tip cleaners (or have both problems).

6) Is your torch not cutting very well? If you have the smaller (& cheaper) single stage gauges, you might try cranking up the cutting pressure again. This was going on for my single stage outfit, & I just assumed I was real low on acetylene.

But when I shut off the tanks later, I saw that the O2 cutting pressure reading was still at 20 PSI. So I was only using 20 PSI to cut instead of 40! I pulled the gauge’s needle off & re-set it. It was good to go again.

Welding Safety includes safe equipment and safe usage!

Welding Safety MEANS safety for you AND your customer AND those helping you!!

Related Welding Lenses Articles

Compressed gas cylinders are use all over the place, in homes and offices, and in industrial sites where fuel is needed. However, these canisters are highly volatile and have to be kept in perfect condition if they are to be used safely. Cryogenic cylinders, on the other hand, not only have to be safe, they also have to withstand some rather low temperatures too. All in all, these canisters withstand huge pressures and the slightest crack or hole makes them very dangerous things indeed.

The canisters come in very many sizes depending on what they are being used for. For example, in hospitals; they are used to hold all the different gases that are needed when someone is undergoing an operation. In the industrial field, they may be used to hold highly flammable substances needed for welding and such. Even carbonated drinks use them too since we all like the bubbles in soda.

Care and attention must be given to the storing of such canisters because of the volatility of what they contain. Anyone wanting to purchase such a canister must always go to someone who is well versed in their care. If there is even the tiniest of holes, this thing can go off like a rocket and some people have lost their homes when one explodes inside.

If one now adds highly flammable liquids inside the canister, maybe for acetylene welding etc, the heat and the fuel together make for a rather explosive mix too. So it is very important that hard-wearing and leak proof canisters are sought right from day one. It only takes one mistake to ruin the reputation of a company so bona fide suppliers will definitely go that extra mile to make sure that they only supply top quality goods.

Indeed, a good company will advise those who buy canisters on how to take care of them from the minute they leave the place. Customer care and attention is a high priority so they give out information freely to ensure that no one will get hurt or property destroyed by a canister that is badly handled. This also aids repeat business too since those who have been treated well will always come back for more, and usually they bring other people with them to get the same service as well.

Looking for a qualified and respected company to supply this kind of canister then is a top priority. The internet is the perfect place to start the search and checks can be done on any company at the same time. Background checks are very possible these days and it must be well worth the trouble considering the damage that can be done if someone does not take care.

In fact, it may be a good idea to check out who they supply anyway to see what kind of service they give. If some multi-national is buying from them, it is probably a safe bet that they have already been vetted thoroughly. This is not the time to be penny-pinching from back street suppliers since cheap is not always best!

More Welding Gas Cylinder Sizes Articles

The popular jewelry manufacturing procedure was already recognized for the use of gas welding in mid nineteenth century also, but only a blend of hydrogen and oxygen was used in the process as, together, they formed a very intense and hot blaze. It was the invention of acetylene at the end of the same century that shaped gas welding what it is today. Acetylene is a gas that is formed by the chemical grouping of water and calcium carbide; in gas welding, this amalgam may provide flames up to 4000 degrees Fahrenheit. Currently, it is pretty common to use a combination of acetylene and oxygen in gas welding to acquire a higher temperature of 6000 deg. F.

The advantages of gas welding include lower costs, mobility of LPG equipment transport and flexibility, compared to the use of electric set ups. Moreover, there is no difference in terms of performance since any metal can be welded, cut or heated using a gas welding tool on oxygen and acetylene. If you choose gas welding, ensure that cylinders need to be kept in a vertical order, and that the caps of valve should be in right place when the cylinders are not in use.

The cylinders are associated between them and the torch with all sorts of hoses, available in various sizes; one prominent mention here is that all hoses used in gas welding need to be marked with the kind of repair level they are meant for: light, normal, or heavy. When purchasing the LPG equipment, make sure that you know all the details for the rubber welding hoses. The user of Gas welding is exposed to the danger of combustion in the hoses and regulators; hence, daily valve tests are required in order to ward off flashbacks.

Some of the gas welding tools are specifically designed to curb flashbacks; which is acquired with the help of a flashback arrestor. This device is identical to a check valve, but it also includes a trap that cuts of the gas flow when flashback occurs; hence, arrestors are a must-have type of LPG equipment that is important for those who use gas welding equipments.

Gas Welding Safety Tips

To lift up gas cylinders, use the LPG equipments that are designed to perform that task.

Check torches and clean only using suitable tools.

While welding use blowback guard torches.

Always keep a watch on the LPG equipment and fix any leakages at all connections.

Check hoses for worn and leaks spots.

Keep fire extinguishers at handy places, at the welding site.

Keep cylinders and hoses away from flames, sparks, to avoid any holes on it.

Use a flint lighter to fire the flame in welder.

Use two-stage regulators whenever required.

Open cylinder valves very slowly when using a single-stage regulator.

During using a single-stage regulator, open only the acetylene cylinder valve 1/4 to 3/4 turn.

Keep the wrench in place. In this way you can close the cylinder easily and quickly in case of any emergency.

Established in 1993, Riland Industry Co., Ltd. is the first manufacturer of inverter welding machines in China. With 16 years of R&D effort, today Riland has become the leader in manufacturing inverter welding/cutting power source and integrated automatic welding equipment sets. For details, please contact benjamin@riland.com.cn

Find More Gas Welding Sets Articles

Brazing process exudes fumes, emissions and radiations that may be harmful for the people involved in conducting and managing. The people working in this industry are exposed to gases and harmful radiations that are exuded by the brazing of the base metals and the filler metals. The emissions can affect the workers, physically because of the sparking in the process and can cause respiration problems as well. Physically the body parts – nails, hair, eyes, skin – exposed to these sparking fumes and gases might get affected. Brazing safety measures should be adopted to combat these hazards.

To ensure complete working safety for the brazing workers, safety equipments have been developed. These equipments must be worn by the workers while conducting brazing. They save not just from the hazardous side effects, but also make it comfortable.

Leather Body Suit

A leather body suit is designed for people who are involved in bonding techniques like soldering, welding and brazing. It saves the body parts from sparks and heat caused by brazing. It is a made of non-flammable and heat resistant material. A body suit must be worn over the normal daily wear clothes for complete body protection.

Gloves

Gloves are not included in the body suit. And should therefore be separately arranged for and worn. Gloves are very important as your hands are the amongst those parts of the body to the that are closest to the brazing area. Leather gloves are again heat and fire resistant, and a must safety equipment.

Shoes

Just like gloves, shoes should also be made out a similar material. Apart from being close to the sparks, feet are also exposed to distant sparks flying down or any hot substances on the floor. Special shoe coverings keep the feet safe.

Brazing Glasses

Blazing glasses are also available, made out of special material for protecting the eyes from the harmful radiations produced by the excessive heating.

Helmet

Heat, radiation and chemicals fill the air in the surroundings and cause harm to the facial skin and hair. Inhaling of these gases is also harmful for our respiration system. It is advisable that every worker should wear helmets for complete protection through the process.

Related Brazing Equipment Articles

Welding is one of the most resourceful activities in the world.  Defined as a fabrication process that is used to join materials, welding often requires the melting of a material before joining it to another through the use of heat.  The welding industry employs a large number of workers and, because it is a dangerous job, it requires specialized training and certification.

In addition to pre-employment training, welding also requires specific safety measures that must be followed by every worker.  The proper knowledge combined with today’s technology can reduce the likelihood of injuries related to welding.  However, the risks associated with any job can never be completely eliminated.  Because welding commonly involves exposure to extreme heat, there is a significant risk of burns.  In an effort to prevent this risk, welding professionals must wear protective clothing, including leather gloves and special long sleeve jackets.  The additional coverage will help to prevent the likelihood of flames coming into contact with the skin and thereby helps to prevent burns.  

Actual contact is not the only risk associated to welding.  In fact, the brightness of the welding process is often damaging to the worker’s eye.  A condition may develop as a result of the cornea becoming inflamed and/or the retina becoming burned after exposure to ultraviolet light.  In order to prevent this occurrence, welding professionals are required to wear a helmet and goggles with a darkened face plate.  A number of companies also manufacture helmets with the face plate built-in.  

Welding professionals are also often exposed to harmful gases and/or smoke.  In an effort to reduce the worker’s exposure to these potentially dangerous pollutants, proper ventilation must be provided.  Employers who offer welding positions are responsible for the care and safety of their workers and, as such, are required to uphold certain safety standards in maintaining a proper work environment.

In order to find work as a welding professional, interested candidates are usually required to attend classes for certification.  The length of time spent in this type of learning environment will vary depending on the position and required expertise of the welder.  In order to enroll in welding certification classes, candidates will likely be required to pay a small fee before signing up.  The certification process is not lengthy and classes typically last for several months.  After successful completion, the graduate is awarded with a welding certification.  At that time, he/she may apply for jobs in the industry that is related to their field of study.

Global NDE Guru , www.ndeguru.com – Our online multimedia Ultrasonic Testing- Level II, training is deigned to fulfill the requirements of ASNT SNT-TC-1A , CP -189, other equivalent standards and customer specific written practice for training and certification of NDE personnel. This method will give you in depth knowledge of ultrasonic shear wave theory, application on weld inspection, interpretation and evaluation of weld discontinuity etc. This course will give you 24 hours of credit for your certification in this method.

More Welding Certification Classes Articles

• Protect your eyes with these convenient and comfortable goggles
• Fit securely and comfortably with the soft PVC frame and adjustable strap
• Feature with 4-vent ventilation provides additional comfort
• Switch easily between tasks with the convenient flip up lenses
• Meet and exceeds ANSI Z87.1 standards

Product Description
Protect your eyes with these convenient and comfortable Welding and Torch Safety Goggles. The soft PVC frame along with adjustable strap ensure a secure and comfortable fit, while the 4-vent ventilation provides additional comfort. Flip-up lenses style lets you switch easily between tasks without taking off the goggles. These goggles meet and exceeds the ANSI Z87.1 standards.

Neiko Comfort-Fit Welding & Torch Safety Goggles – Flip-Up Style, ANSI Approved