Welder World Blog

Posts Tagged ‘pressure’

Most people assume that purchasing pressure washers is a simple matter of going to the store and choosing one, but they do not consider that there are many types and styles of pressure washers that they need to choose from. This decision can be quite a difficult and overwhelming one if you don’t prepare before you visit the store. By learning more about the types of pressure washers that are available, you can choose the right one for you and your needs. What are the differences in pressure washers?

Hot or cold pressure washers. This difference is whether you are going to use cold or hot water to do your cleaning. Hot water cleaning is more for areas that are greasy or oily, while cold water cleaning is for other uses. A hot water pressure washer should not be used on surfaces that may be heat sensitive, including plastic, rubber, and some types of paint. Consider where you are going to be using your pressure washer to determine which type that you will need for your particular use.

Pressure differences. A certain amount of pressure is needed to break the bond between the surface of the item that you are cleaning and the dirt or other thing that you are trying to remove. There are many different degrees of pressure available on pressure washers, so you need to find the right one for your use. If you are planning on using a pressure washer for over 20 hours a week or for work, then a higher pressured commercial washer would be a better choice, because it works more efficiently. If you are only going to use it periodically to wash your deck, boats, or other things around your home, then a lower pressured washer may be the right choice for you.

Gas, electric, diesel, and hydraulic pressure washer. The next decision that you will have to make is whether you want a gas or electric pressure washer. A gas powered pressure washer is more mobile than an electric pressure washer. It is great for using around the home or other area where you need the added mobility to wash cars, boats, homes, and more. An electric pressure washer is a good choice for a factory or shop where you are more able to keep it plugged into an electrical source. Diesel pressure washers are more expensive than gas or electric models, but they will also outlast these models, so you will get maximum value for the added expense. A hydraulic pressure washer is a very economical choice that is both light and efficient to use.

How do you use pressure washers? Are they hard to use? The main goal when using pressure washers is to break the bond between the surface and the dirt. This process is made quicker and more efficient by using a pressure washer. The combination of the pressure, water flow, and detergent can help to break the bond between the surface of the item and dirt. You are letting the machine do the work for you, rather than you having to scrub a surface to get it clean. That is the best part of a power washer. From using it on cars, houses, boats, decks, and other surfaces, you can help to clean the surface or to prepare it for paint or other treatment. Let one of the many different types of pressure washers work for you. You will be glad you did.

Find More Pressure Washer Articles

Deciding to hire a contractor for pressure washing needs is a major decision. Pressure washing is not a universal cleaning method that will fix anything so careful consideration must be made when thinking about exactly what needs to be cleaned. Some common methods of pressure washing include water blasting, sand blasting, soda blasting and dry ice blasting. Dry Ice Blasting has become the most popular method of pressure washing because it is non abrasive, evaporates immediately, requires no secondary cleanup and is non-toxic.

However, even dry ice blasting can prove to be an inferior attempt to clean if the correct method is not chosen. Choosing the right dry ice blasting company is a task to be taken seriously because not every contractor will have the methods that you need to ensure the safety of your objects being cleaned.

The following items should be considered when choosing to hire a dry ice blasting company:

Credibility, equipment, products, methods and price.

The first suggestion is to ask about their certifications. If you are hiring a contractor to do your pressure washing, they should have appropriate contractors requirements for the state that they’re doing the work in. If the dry ice blasting company knows what they’re doing, they should know what requirements they need and be able to show them to you upon request. In having expertise of their trade, they should also have expertise in the products and services they offer.

Ask about what kind of dry ice they are using as well as the kinds of machines for each job. Continental Carbonic sells their dry ice by measuring it at the very last minute in order to maximize the volume of it. If your dry ice blasting company is buying an inferior product they will more than likely offer an inferior service. Also, what kinds of dry ice pellets are they using? If they are using anything larger than 1/8 inch sized pellets then they could be damaging your surface or reducing productivity (especially if you’re paying by the hour).

Dry Ice Pellets used on a high pressure blaster are excellent for removing grime, oils, mold, and weld slag. The process of blasting dry ice to these surfaces attacks the surface of the contaminant with the pellets through a hose at a high speed and breaks it apart while evaporating at the surface of the object.

However, dry ice pellet blasting is also not the universal method to cleaning surfaces. One method called Block Shaving grinds the dry ice into a finer grain like a flaky snow. This kind of blasting is ideal for thin surfaces to be cleaned and even glass. Although this method is much slower, it also is less impacting on the blast to surfaces which is good for more fragile objects being cleaned.

Most importantly, shop around- Don’t get ripped off by the first pressure washing company that you happen to come across. Consider the costs of what it would take to have a dry ice blasting contractor come and clean up your objects. If the objects being dry ice blasted are small and tough enough to withstand pressure washing, consider renting a dry ice blaster to do the work yourself. However, it might be recommended for much larger and delicate jobs to have a professional and experienced contractor take care of the work for you.

Understand the cleaning methods of the objects that you need cleaned need to be carefully considered in order to get the most of your money as well as the continued use of your equipment being cleaned.

Related Welding Jobs In Minnesota Articles