Welder World Blog

Posts Tagged ‘industry’

Lets not kid ourselves; a welders job aint fun! A welders got to work in the hottest and sometimes in the most cramped up space as he brings to life the most complicated of designs. But if its so much of hard work, why is it that more and more people would rather prefer to face the dirt and grit than anything else? The job satisfaction thats achieved at the end of the long and grueling work is incomparable. A design thats finished to perfection is nothing less than a master piece. Thanks to technology, the work isnt as grueling as it was a few years ago.

Welding is a huge field, with plenty of specializations. One such is, mobile welding. The job allows people with their own vehicle to undertake welding jobs on the go. The welding vehicle is modified to accommodate the equipments used for the service. While most welders perform structural welding or pipeline welding, the most common among them is stick welding.

Some of the most common service offered by welding companies includes fabrication, welding and cutting including TIG, MIG, residential, industrial and even ARC gouging.

When choosing a professional for mobile welding, remember to exercise care and caution. The greatest advantage of seeking help from a professional mobile welder is that you can get the best help right to your doorstep rather than having to scout for them. The expert can come to your place to weld your fence or steel structure rather than you going to him for help. Albeit a little expensive than normal services, mobile welding has become very popular mainly because of the convenience aspect.

The internet is a great resource to look for qualified welders in your place. You can choose them from the several web directories in your place. But make sure, you enquired well about his credentials. Theres nothing quite disheartening than a product that is shoddy. Another thing to look for in a mobile welding service company is if they are registered with an association for welders in your locality. Professionals hired through these associations are sure to follow industry set standards.

Its not only the mobile welding industry, but the entire welding industry in general has witnessed stupendous growth. If reports from the American Welding Society are to be believed, for every two welders who retire, only one enters the workforce. This automatically translated business for the people joining the industry.

So the next time youre looking for the convenience of getting your work done at your place, make sure you call for the services of a professional mobile welder.

So What Are Some of the Applications For the Gas Tungsten Arc Welding Process?

Free Online Articles Directory

Why Submit Articles?
Top Authors
Top Articles
FAQ
ABAnswers

Publish Article

0 && $ .browser.msie ) {
var ie_version = parseInt($ .browser.version);
if(ie_version Login

Login via

Register
Hello
My Home
Sign Out

Email

Password


Remember me?
Lost Password?

Home Page > Home Improvement > Construction > So What Are Some of the Applications For the Gas Tungsten Arc Welding Process?

Categories
AdvertisingArts & EntertainmentAutomotiveBeautyBusinessCareersComputersEducationFinanceFood and BeverageHealthHobbiesHome and FamilyHome ImprovementInternetLawMarketingNews and SocietyRelationshipsSelf ImprovementShoppingSpiritualitySports and FitnessTechnologyTravelWriting

So What Are Some of the Applications For the Gas Tungsten Arc Welding Process?

By: Jennifer Jenkins
Posted: Jan 04, 2011

]]>

So what are some of the applications for GTAW?
Obviously, this process is used for a wide variety of applications where the parts are made out of non-ferrous metals. Maintenance and repair is done by both manual and automatic methods of Gas Tungsten Arc Welding. From stainless to titanium, aluminum, inconel, monel, cobalt, magnesium, hastalloy, you name it, and it can probobly be welded with TIG.

It is appropriate for welding of pipe and tubing in all positions. The excellent control of heat input gives maximum penetration while preventing melt-through on the root (first) pass. A lot of times a procedure is used where the root pass is welded with the GTAW process and then completed with Shielded Metal Arc Welding, Gas Metal Arc Welding, or flux Cored Arc Welding. This is used to obtain a high quality, low cost weld.

Consumable inserts are sometimes used in critical service applications. These inserts reduce porosity when alloyed with deoxidizers, improve the contour of the underside of the weld, and minimize cracking in the weld. On thin pipewall (depending on the base metal) , complete fusion is obtained without the use of filler metal. Filler metal , is used with thicker sections in order to fill the joint. Pulsed current may also be used.
Automatic circumferential or orbital Gas Tungsten Arc Welding is also used to weld pipe and tube.
Power piping, Air piping, Refrigeration piping, Chemical industry process piping, and Nuclear power piping are some of the different industries that apply the Gas Tungsten Arc Welding  process for welding pipe and tubing. Vacuum jacketed piping and pressure piping are a couple of cases where critical welding is required.

Nuclear Power Facilities :

Critical welding in the construction and repair of nuclear power facilities is required. Both manual and automatic methods are employed for many nuclear applications because of their precise control of the welding.
Pressure Vessels, Boilers, and Heat Exchangers :
Gas Tungsten Arc Welding has a wide range of applications in  the pipe and tube industry for the welding of pressure vessels, boilers, and heat exchangers. It is employed where full fusion welding is made from one side, without the use of permanent backing rings, and on girth butt welds with a smooth internal contour. Adequate mechanical strength and corrosion resistance for a particular service encountered can be obtained by choosing the correct filler metal and welding conditions.

Aerospace :

The Gas Tungsten Arc Welding process is the major welding process used in the aerospace industry. Aircraft, spacecraft, and launch vehicles are a few of what’s included in this industry. Some of the metals welded include aluminum, nickel, stainless steel, magnesium, and super alloys. Both the manual and automatic methods are employed in this industry. Pulsed current is also used extensively in this industry. Just about all critical welds made in this industry are done by TIG and a highly skilled welder.

Ships :

The Gas Tungsten Arc Welding process is applied in the ship-building industry because different materials like aluminum, molybdenum, and stainless steel are used. There is a lot of applications in this industry for the welding of stainless steel and aluminum.

Transportation :

The Gas Tungsten Arc Welding process is used somewhat in the automotive and railroad industries. It is used mainly for the welding of non-ferrous metals, maintenance, and for small components. Fabrication of aluminum fuel tanks is one application used in this industry.
In the railroad industry, several of the interior components are made of aluminum, stainless steel, monel, and copper are sometimes welded by this process. Some maintenance and repair of passenger trains is also performed.

Another area of use for this process is contractor work. If you have the equipment and skill you can charge anywhere from – 5 per hour. I personally know a person who’s company charges per hour for TIG aluminum jobs and he gets it. If you don’t have the equipment, you could always try to go to work for a contractor. TIG welding is a very rewarding profession, and they always need skilled welders.

So my advice to you is, if you want to be a TIG welder, get some training ( I recommend The Hobart Institute of Welding Technology in Troy, Ohio ) They’re the best! Maybe, if you could afford it,  get a certification in GTAW while you go to school there. Apply yourself, and learn as much as you can. Then be aggressive, and go out there and get a job in the TIG welding industry. Make sure to keep your attendance perfect, if at all possible. Employers want you to come to work and be on time. If you do this you’ll be on your way to an interesting and fun career that is rewarding.

Jennifer Jenkins

 

 

 

Jennifer Jenkins – About the Author:

Jennifer Jenkins is an expert in many niches. She would like to invite you to visit another one of her and husband Ralph’s many websites. If your interested in earning extra cash while working at home, then go to http://www.free9fastcashvideos.com and sign up to get your FREE membership and a totally FREE 9 video course on how to start an Internet Marketing business.

Source: http://www.articlesbase.com/construction-articles/so-what-are-some-of-the-applications-for-the-gas-tungsten-arc-welding-process-3967313.html

]]>

Increase your traffic today just by submitting articles with us, click here to get started.

Liked this article? Click here to publish it on your website or blog, it’s free and easy!

Rate this Article

1
2
3
4
5

vote(s)
0 vote(s)

Feedback
Print

0) {
ch_selected = Math.floor(Math.random()*ch_queries.length);
if(ch_selected == ch_queries.length) ch_selected–;
ch_query = ch_queries[ch_selected];
}
}catch(e){
ch_query = document.title;
}
]]>

Article Tags:
gas tungsten arc welding, gtaw, non ferrous metals, arc welding, welder, stainless steel, applications, pipe and tubing, nuclear power, filler metal

Latest Construction Articles
More from Jennifer Jenkins

English Cottage House Plans

When we think of a cottage we think of the quaint, country homes, and this can be accomplished with English cottage house plans. For years this style of building has been associated with the feelings that everyone wants. They are comfortable, and often bring comfort to those who see them, and the look of them has attracted the eye of countless people over time.

By: Verny L

Home Improvement >
Construction
May 24, 2011

An Overview Of Sheet Metal Fabrication

There are a large number of applications that have been manufactured from one type of metal or another. The type of metal used would largely depend on what the application is used for, and the same applies for the metal’s size and shape. If you take a look at all the items around you, you will find that many of them are made through sheet metal fabrication.

By: Ariel

Home Improvement >
Construction
May 24, 2011

Teds Woodworking Plans Review – Teds Woodworking Scam?

Woodworking can be so much fun! And it can also be very rewarding as your projects come to life & become useful additions to your house or garden. Bedroom furniture, baby cots, outdoor furniture, kitchen cabinets can all be simply and easily made with just a basic skill level. But where do you start?

By: Jayden

Home Improvement >
Construction
May 24, 2011

Things You Must Know About Installing Fire Pits

Installing outdoor fire pits can both enhance the look of your property and keep you warm while you spend some time with your loved ones. Now, you do not have to stay indoors all through the winters.

By: harrywillson

Home Improvement >
Construction
May 24, 2011

Solar power and its benefits

Solar Power has become much more common & convenient for households in the past few years. If asked for its definition, most people would simply say it is the kind of energy that comes from the sun. The ability to convert sunlight into electricity comes into two ways which can be either direct or indirect;

By: premier solar

Home Improvement >
Construction
May 23, 2011

Gas Tungsten Arc Welding, A Profitable Career Choice

If you are already a seasoned TIG(Tungsten Inert Gas) or (Gas Tungsten Arc Welding) welder, or if you want to be a TIG welder, I’m going to give you a few things to think about. A good TIG welder can command a very good living. Sometimes six- figures or more.

By: Jennifer Jenkins

Home Improvement
Jan 02, 2011

Safety And Health of Welders Don’t Forget It

Welding and Cutting can be a very dangerous occupation or past time. With this said, I intend to give you some of my professional advice, and a special heart-felt plea! Please!

By: Jennifer Jenkins

Home Improvement >
Construction
Jan 01, 2011

Comments on this article [0]
Add new Comment

Related Videos

Learn How To Weld

Grinding the Welding Seems Smooth on a Morris Minor

Morris Minor Welding Project Conclusion

Ask a question

Ask our experts your Construction related questions here…

200 Characters left

Related Questions

How many welding processes are there?
Does jb weld work on gas tanks?
How long does a mortgage to rent application take to process before you know if your accepted by the scottish goverment

]]>

Need Help?
Contact Us
FAQ
Submit Articles
Editorial Guidelines
Blog

Site Links
Recent Articles
Top Authors
Top Articles
Find Articles
Site Map
Mobile Version

Webmasters
RSS Builder
RSS
Link to Us

Business Info
Advertising

Use of this web site constitutes acceptance of the Terms Of Use and Privacy Policy | User published content is licensed under a Creative Commons License.
Copyright © 2005-2011 Free Articles by ArticlesBase.com, All rights reserved.

More Welded Rings Articles

With increasing frequency, customers in the gases and welding industry are looking to the Internet instead of their local distributor for answers and second opinions when it comes to new products and technologies. However, there are ways gases and welding distributors can take advantage of this trend. “Establish Yourself As An Expert,” which appears in the Winter 2011 issue of Welding & Gases Today, the leading magazine for the gases and welding equipment industry, shows how GAWDAwiki (www.GAWDAwiki.org) connects suppliers, distributors and end-users.

With more than 1600 industry-specific definitions and over 37,000 page views every week, GAWDAwiki has proven itself as the go-to resource for customers and end-users looking to the Internet for a reliable source of information. What differentiates GAWDAwiki from other resources is that the terms and descriptions were contributed by those distributors and suppliers in the gases and welding industry who know the products and applications best. When a distributor or supplier adds to a definition, their company name and website can be displayed under the definition, letting end-users know who provided the information.

Recently launched is a version of www.GAWDAwiki.org for use on smart phones. When you access the site on your phone, you will be automatically redirected to our mobile site, or you can bookmark m.GAWDAwiki.org. With the fast-loading mobile site, customers, end-users and even salespeople can access the wiki’s resources instantly without the need for a computer.

To see how GAWDAwiki is connecting the gases and welding industry, read “Establish Yourself As An Expert,” (http://www.weldingandgasestoday.org/index.php/2011/01/establish-yourself-as-an-expert/) at Welding & Gases Today online. For more information, contact Devin O’Toole, contributing editor at Welding & Gases Today at devin@weldingandgasestoday.org or 315-445-2347.

More Welding.org Articles

Logistics and transportation are areas where efficiency makes for a successful bottom line; many industries have been lured from North America by lower overhead, less regulation, and more freedom to dump waste. The last thing industry here in the First World needs is an expensive disaster that interrupts the supply line to industries like metal stamping of parts for larger industries. Deadlines for delivery, the cost of shipping – vital factors like these can become unmanageable during a sustained interruption of the logistical chain.

Take for example the raw materials and machinery needed to operate a custom metal stamping factory that makes parts that require custom parts made with difficult forms or deep drawing to fill the order that makes another company tick. The stamping factory will need special tools and stamping machinery. The best equipment would be most likely imported from Germany where the highest quality machinery is produced. The German equipment comes in across the ocean into a city like Detroit or Chicago, where it may change over to finish the journey by rail. Then the rolls of steel or aluminum have to come in from another continent perhaps. All of this cargo is typical to shipping on the Great Lakes. An accident or sabotage along one of the canals or locks could paralyze many industries, and in fact both accidents and sabotage have occurred along the Welland Canal.

It was a clear and pleasant evening several miles from where I grew up in Welland, in a small town called Allenburg along the canal heading north to St. Catherines. Allenburg is basically a coffee shop, a stoplight, an antique store – oh yes…and one lift bridge. Canal bridges are pretty easy to drive – one stick makes them go up, the other stick makes them go down. You see the lake boat coming, raise the bridge; after the boat passes, lower it and raise the gates for the long line of cars to continue on their way. It seems simple enough but when the lake freighter Windoc, carrying million dollars worth of grain was passing through the bridge began to come down before the ship had cleared. The funnel crashed into the span and was sheared off, destroying the freighter and the bridge. The Seaway had to close for several days, causing a chain-reaction as boats had to set anchor. The bridge had to remain in the up position for the rest of the shipping season, to the consternation of drivers who had to take a detour for nearly a year. N.M. Paterson and Sons, the owners of the Windoc had to sue the Seaway operators for .8 million to recover their losses but the day-to-day losses cost time and money to thousands of other businesses due to interruption in production.

Security along the Welland canal in Ontario is practically non-existent; the last sabotage plot was in 1916 when German diplomat Franz von Papen threatened to blow up the canal, but he had already been expelled from the U.S. for espionage. A dynamite charge was planted on the hinges of one of the locks in 1900 doing minor damage. When it comes to sabotage the official story of the 2000 – 2008 White House regarding terrorists states that terrorists are everywhere waging war on North American soil yet there’s an easy target on the Canadian side of the border that would cause havoc if taken out by explosives. Without bridges and lift locks St. Lawrence Seaway would close for a long period and disrupt the economy. Interrupting logistics is a basic tenet of military strategy. The answer is that the corporatists and extremely wealthy elite are in control of events and they will only destroy things when it’s in their interests, such as the military implosion demolition of the obsolete, largely non rentable, asbestos-ridden towers of the World Trade Center. Anyone who works with steel will tell you that fires can’t cause skyscrapers to collapse and explode into a fine dust. The implosion that removed Building 7 was recorded from many angles. All three buildings went down at the speed of gravity, the hallmark of controlled demolition. They who own the cargo protect the route on which it travels.

Motoman Welding Robots Choreographed to look like they are dancing…brought to you by www.weldingtipsandtricks.com The 2009 AWS welding show expo in Chicago was well attended with vendors from all over the world… Miller Welding, Lincoln Welding, Esab welder equipment, Hobart welding, Weldcraft tig torches, Uniweld oxy fuel equipment, Tweco mig guns, Speedglas auto darkening helmets, Jackson welding hoods, Smith Torches, Harris oxy acetylene , Victor torch company and others were all displaying welding supplies of all kinds
Video Rating: 5 / 5

More Welding Supply Chicago Articles

What’s it about?

From large luxury powerboats and sports boats to wooden dinghies and narrowboats, the marine industry can produce a wide range of professions dealing with watercraft for you to indulge in.

An apprenticeship in this trade has several pathways which could see you working in a number of roles- from aspects of boat building, maintenance and repair, to marine engineering, electrics and electronics. Most apprentices will work under the supervision of others and undertake tasks such as boat handling, support, repair, and outfitting.

You won’t necessarily be working in coastal areas either, as a fair amount of the UK’s waterways industry is based around canals, rivers and lakes. So don’t worry if moving far away from home is your only hindrance.

 

Who’s it for?

It’s vital you’re a physically fit person as you’ll be crafting away with much manual work which can really take its toll. Practical and technical skills are important too as constructing frameworks could play a big part in your apprenticeship.

Those in the marine industry spend a large period of time away from home and work unsociable hours- you’ll need to be prepared and willing to do this if you want to survive in the industry.

Having the ability to communicate well with others and being a good team player are both essential skills for marine professionals.

 

What do I get out of it?

As an apprentice, you could learn a variety of skills and techniques to build boats of all sizes and for all functions. You might use carpentry, electrical, plumbing and welding skills as well as more traditional maritime craft skills like rigging and sailmaking. The work could involve constructing frameworks, hulls and decks – even installing parts such as engines, propellers and steering systems.

Apprentices on the advanced apprenticeship will be working as craftspeople and taking up more complex work without direct supervision. Many career paths stem from this apprenticeship – at the end of it, you’ll have a large range of skills and the practical experience needed to get ahead in the industry.

The framework of the apprenticeship consists of, an NVQ at Level 2 or Level 3 with an advanced apprenticeship. Those taking the advanced level could go on to do a higher qualification such as an HNC or NVQ at Level 4. And there is likely to be a combination of on-the-job and off-the-job training.

Job roles as a marine craftsperson, engineering technician or a boatbuilder are just a few of the opportunities that will be available to those who complete the apprenticeship. A starting salary of £12k- £17k once qualified, is standard in the industry.

There is a particular shortage of skilled craftspeople and technicians at the moment in the marine sector- so an apprenticeship is a great option!

So…all aboard!

 

Welding Machine is equipment, which is used to weld or joint two metals or alloys together using another metal component as filler. Usually structure-less metals and alloys are joint using welding machines to give them desired shape and make them sturdier than they would be if it were a single piece.

These machines are available in different sizes as per their utility. A large size machine would be used in a factory and a handy machine is available for domestic purpose. Types of machines that are available in the market vary from Arc welding machine, Fusion-welding machine, Plasma Cutting machine, Resistance welding machine, Solid State Welding machine and less known types are Induction and Thyristorised welding machines.

Among all the types, Arc type machines are the most efficient and effective. According to the type of material used to weld, they are broadly classified into three categories.

Common most is the Manual Metal Arc mechanism. The tool looks like a stick, which performs the function of a main electrode, and it is covered by a flux that prevents it from oxidization. With the help of electricity, the electrode melts itself continuously for welding the metal. This equipment is mostly used for small tasks. This kind of machine is usually used in construction industry, maintenance and repair of small metals, cutting and making holes in steel products and rebuilding fixtures.

Second form is a Metal Inert Gas mechanism which is a large bobbin like formation. It is a single piece of equipment that includes a mix of argon or helium gas or both used along with the heated electrode to camouflage the metal from rusting. This makes the task easy and quicker. Metal Inert Gas equipments are mainly used in shipbuilding, power plants, aerospace equipments, automobile industry, bridge constructions and refineries.

The third kind is Tungsten Inert Gas, which has a single electrode, and the protective material is provided by another resource. The electrode does not thaw out as it has an additional tool to give it protection. This type of mechanisms is used in large factories where it is impossible to use other type of welding machines. Principally, Tungsten Inert Gas machines are used in power plants, construction industry, aerospace industry and manufacturing industry for more robust and specialized welding.

Apart from these, other type of welding machines that are available in the market are:

Carbon Arc, which is used for welding alloy steel and water jet cutting.
Orbital or Tube Arc is used in casting, shipbuilding, automotive industry etc.
Plasma Arc is used for welding of surgical instruments, food industry, dairy industry etc.
Stud Arc is mostly utilised in fabrication and machining.
Submerged Arc is chiefly used in industrial welding and pipe welding.

Any industry usually uses a combination of any of the above machines as per requirement. Welding machines are easy to use but is a complex piece of machinery and hence should be operated under expert guidance.

 

Carpenters specialise in the working and constructing of wooden and similar materials on a range of projects, with their project suitability spanning across major construction projects to home renovations and everywhere in-between. Carpenters are highly requested from corporate construction projects such as office or public buildings to residential projects or small scale renovations, withthe construction projects alone asking carpenters to perform jobs ranging from the framework to the roofing to flooring. Naturally, aside from the construction industry carpenters also receive a large majority of jobs from residential projects. The sheer range of carpentry projects that are available has resulted in several branches of carpenters within the industry.

Styles of carpenters

The specialised field of carpenters, while broadly similar across the industry at the beginning of a carpenters career, has different avenues that carpenters can focus on throughout their career. What this means is that a carpenter will pursue kinds of jobs that asks for and develop the various skills needed for different levels of carpentry. Largely, there are five kinds of sorts of carpenters that centre on different categories of carpentry jobs although there are two that make up the greater part of the carpentry industry. That is Rough carpenters and Finish carpenters.

Rough Carpenters

Rough carpenters are those that operate on the various jobs linked with structural construction work, framing and even roofing. The jobs linked with this speciality of carpentry include:

Rough Carpenter Jobs

* Pre-construction work – sizing, scaffolding, bracing, and formworks preparation

* Making frames, partitions, floor construction, walls, insulation, roof trusses and construction

* Understanding construction blueprints, measurement of materials required and distances, dimensions of structure which are all crucial for major construction projects

* Managing the sizing and cutting of various wood materials, knowing the different requirements of the different types of wood

* Understanding construction of both wood and metal structures, which is fundamental is the construct of building of frameworks

* Understand the the carpentry damage that can affect different types of wood, including any decay or rot

* Fabricate parts through woodworking and metalworking machines, dig post holes, and construct support structures

When selecting deciding on which rough carpenter to sign up for a project, simply look to their experience in the kind of carpentry that you are after to determine if they are suitable. Furthermore, a prospective customer should request examples of any earlier jobs.

Finish Carpenter Jobs

Finish carpenters are those that work specifically with the finished product of a project. The amount of jobs that this can relate to is diverse including:

* Decking
* Roofing
* Interior trimming
* Siding
* Drywall detailing
* Remodelling
* Intricate woodwork projects

Finish carpenters are commonly more expensive to employ but they commonly have high experience and are decidedly skilled, which means that for a little extra they will provide a clean and artistic finish to a wooden project.

Finish carpenters require to have a sharp eye when creating the style, joints and overall look of a project or room which means the choice of who to hire can be crucial for a successful project or renovation central which means that the selection of who to hire for the job is essential for the overall look of the finished product. Begin by assessing their previous projects, price quotes and years of experience in order to warrant that you are hiring someone that is capable.

Other carpenters jobs include:

* Cabinet Makers – furniture and interior wooden cabinets
* Trim carpentry – window, ceiling trimmings or mouldings
* Ship carpentry – shipbuilding and nautical woodwork projects

Carpenters and the industry of carpentry are extensive and diverse with various branches and avenues that individual carpenters can take on, suiting the scope of carpentry projects that are demanded. Carpenters services are in major demand with the construction, maintenance and manufacturing industries all requiring the services of carpenters.

Welding is a process of combining two or more metals together. Over several decades, manufacturing industries have been heavily relying on the welding machinery. Earlier, welding was considered to be a tough task. With the technological innovations many welding tools and techniques came into the market, which provide you with the best performance. You can see that the famous American statue is also made with the use of welding processes.

 

- Welding tools – Backbone of modern industry

 

At first, while deciding to start an industry you need to focus on the products that is required to be modernized and are of a better quality. One of the most important tools of welding is welder and welding equipments. Some of the welding equipments like arc TIG plasma cutters and certain equipments such as welder gloves helmets are the most important tools that are important for the Welding industry.

 

- Welding tools – Purpose of welding equipments

 

While thinking of buying the welding tools, many factors needs to be considered such as its purpose, what kind of materials are to be used. Make sure that the welding tools that you are going to buy should be proper in size. Also, be sure to decide the budget of your own such tools as they come in different sizes along with different features.

 

- Modern products – profitable products

 

The major aim of any of the industry is to provide a quality product and to gain more profit. In order to earn maximum profit, be sure that the equipments you use should be of modern technology that should make your work easier. Spot welders, TIG welder’s, wire feeders are some of the tool with some advanced design, which makes the work easier.

 

- New invention – Plasma cutter

 

Plasma cutters have been in origin since the world war itself. In fact, they have been used in order to cut steel and metals with high thickness. Earlier, welding was considered as the large process and an expensive one with large in size. But, today even small industries are using plasma cutters that are now available in various sizes with portability and comfort. But, while you decide to buy the plasma cutter, you need to consider several factors. Because different plasma cutters, have different properties.

Golden Spot Industry was established in 1979 as a professional manufacturer for various TIG welders, MIG welders, and auto spot welding machinery. Through years of development, the company now offers more than 50 models in seven series, including wire mesh welding machine, air pressure seam welding machine, flash butt welding machine, spot welder, MIG welding stand, forming machine, other special purpose-welding machine and whole-plant welding equipment. These products have a wide range of applications in many fields of industry like manufacturing, furniture and construction industry.

GOLDDEN SPOT is continually improving its product through rigorous product research and development. The outstanding R & D team, with excellent product design capacity and experience, makes good use of 3D painting software and 3D simulation diagram to shorten the development time and reduce flaws and interference problems. GOLDEN SPOT also has had each Automatic controlling system of welding machine equipped with human-machine interface windows, it helps customers  easily operate and maintain the machine. Besides, Golden Spot owns almost 40 patents in the United States, China and Taiwan.  Take the Spot Welding System of SA-800AF for example, the spot welding device of this Auto Dual-layer Interchanging Type Multi-point Welding Machine has obtained patent in the United States and gotten great praise from customers. We can say that its outstanding innovation ability cannot be underestimated. Moreover, GOLDEN SPOT’s professional engineers and well-trained workers are capable to offer custom design and cost effective solutions for customer requirement. That is to say Golden spot can provide customers with the durable and innovative products that save their cost and make their money at the same time.

Not only Golden Spot has an excellent R&D team that ensures providing technical support for each customer, but also Golden Spot has passed ISO9001-2008 certificate, and the products are approved and certified with CE. Furthermore, in order to ensure product quality, GOLDEN SPOT accomplished a complete quality control system in each production process; No matter Incoming Quality Control (IQC), In-Process Quality Control (IPQC) or Final Quality Control (FQC), all production processes are done according to the high international standard.  ”We manufacture the welding equipments with internationally accepted production standards and expect them to perform with the highest levels of efficiency and precision” Says Ms. Zoe Huang, the sales manager of GOLDEN SPOT INDUSTRY INC.  “In addition, thanks to our strict manufacturing standards, our customers receive the best value available in the welding industry.” Ms. Huang points out the reason why GOLDEN SPOT earned a good name for itself in the international market.  There is no doubt that the perfect performance at technology and equipments makes GOLDEN SPOT become the leader of this profession and successfully leads its own brand into international market.

Company: Golden Spot Industry Inc.

Contact person: Ms. Zoe Hung
Tel: 886-4-2406-5040
Fax: 886-4-2406-1060
E-mail: gold.spot@msa.hinet.net
Website: www.goldspot.com.tw

Welding is one of the more popular vocational trainings in Florida, and for a good reason. The occupational outlook for welders is fairly positive these days, for a variety of reasons.

“Go Green”

Today green technology seems to be the buzz word in business and politics. Everybody seems to be looking for alternative ways to produce power with the smallest carbon foot print as possible. What this means for welders is that the future is bright for this type of skilled labor. Although welding itself may not be seen as a “green job” there will be plenty of opportunity to manufacture components for the environmental industry. Experienced welders as well as new graduates will have no problem in finding a job in the green related industry. There was a time when as far as energy related jobs went a welder could only get a job making oil pipelines or working at a power plant. Not so anymore, today wind turbine technology is growing at a big rate, as well as bio-diesel plants. Wind turbines require large components which makes it inconvenient to be made in other countries therefore they have to be made at home to be assembled and installed.

Welding Jobs Beginning to Rebound

The United States government has announced that it will spend 1.6 trillion dollars within the next 5 years on repairing existing infrastructure and building new ones. Some of this business will come to Florida for the simple reason that Florida is one of the fastest growing states in the U.S. this is obviously big news for the construction related industry. Not only that, according to the Fabricators and Manufactures Association International business in the manufacturing industry picking up. In fact from the research done by them the present recession has had little effect on welding and manufacturing jobs. So for those of you who were worried about the recession affecting welding jobs you do not have anything to fear, both for now as well as the future. If you think that it is only the big manufacturers that have not been affected then you are wrong, that also includes small time or one man welding shops who have largely escaped the negative aspects of the recession. There is still plenty of work out there that is linked to, defense, aerospace, medical and infrastructure related jobs. These industries by and large escaped the recession.

Welding Opportunities in Florida

Today around 2 out of 3 jobs in the manufacturing industry belongs to welding. Structural welder courses do not take as long as many other technical jobs and as soon as you leave school you can start with a good salary. And future looks even better right now as there are not enough trained people to meet demand.