Welder World Blog

Posts Tagged ‘black’

Product Description
4400/10/40-4500 BLACK RIBBON W/WELD SENSOR & REINKER-NEW IN BOX

GENICOM – 4400/10/40-4500 BLACK RIBBON W/WELD SENSOR & REINKER-NEW IN BOX

• Premium solar powered welding helmet with unique designs
• Auto-darkening lens responds in 1/25000 seconds, shades can be switched continuously from shades 9-1
• UV and IR protection are in compliance with EN169 standards for welding filters
• Design and construction meet ANSI Z87.1 standards for eye protection devices, two-way adjustable hea
• Solar rechargeable lithium battery

Product Description
Premium solar powered welding helmet that comes with three unique designs. These helmets fully meet industry standards: auto-darkening lens responds in 1/25000 seconds, darkens when welding begins and clears when welding stops, shades can be switched easily and continuously between shades from 9 to 13 with 1/10000 seconds reaction time, UV and IR protection are in compliance with EN169 standards for welding filters, and the design and construction meet ANSI Z87.1 standards for eye protection devices. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The unique designs make them more than great welding helmets.

Neiko Auto Darkening Solar Powered Welding Helmet – ANSI Approved, Red Flame Design with Polished Black Finish

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date plus stopwatch second hand, central minute, second and 12-hour chronograph sub-dials plus 2 additional time zone dials
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
MOVEMENTS: Miyota FS10 / 2033 / 5Y20 CASE: steel; AISI 316 L IP Black treatment Diameter: 53 mm. DIAL: black; silver or red Spheres and index black; silver or red WATER RESISTA NT: 10 ATM STRAP: rubber black.Amazon.com Product Description
Be the most stylish man in three time zones when you wear the Welder Men’s K29 Triple Time-Zone Chronograph Black Ion-Plated Stainless Steel Watch. The black three dimensional dial has eleven-hand movement to tell time on three separate clocks. The largest clock has red Arabic numerals at eight and 10 o’clock and subdials to track seconds, minutes, and hours. The second clock has numerals at three and 12 o’clock, and the third display has red numerals at two and four o’clock. Mineral crystal keeps the modern display from scratching, and five crowns control all of your three time zone functions. The black bezel and case are cast in durable ion-plated stainless steel, and Welder has added interchangeable black leather and rubber wristbands for extra style. The watch is presented in Welder’s trademark water-tight black suitcase and is water resistant to 330 feet (100 meters).

Welder Men’s K29-8002 K29 Triple Time-Zone Chronograph Black Ion-Plated Stainless Steel Watch

• Variable Shade 9-12
• Reaction Time 1/12,000-seconds.
• Lens Sensitivity and Delay Controls
• Replaceable 2 AAA Batteries
• Meets ANSI Z87.1-2003 Standards

Product Description
Automatic UV and IR filters protect eyes from harmful visible and invisible light during welding. Switching time is less than or equal to 2 milliseconds, so there’s no need to flip the helmet up to see your work under normal light conditions. Full face protection features adjustable head suspension and adjustable delay time,sensitivity and dark shade protection. Viewing area is 3-1/2″ x 1-1/2″.

Hobart 770424 XVS Series Welding Helmet Black

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date plus stopwatch second hand, central minute and 12-hour chronograph sub-dials
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
Movement: OS10 Miyota Chronograph Case: Steel; AISI 316L; IPB Treatment Case Dimensions: Approx. 48mm diameter; approx. 60mm width with crown Mineral Crystal Black Dial with Red Accents Date Display Water resistant: 5 ATM Bands: 2; Black Calf Leather; & Black Rubber Guarantee: 2 years worldwideAmazon.com Product Description
People will want to take a closer look at the contrasting style and unique design of Welder Men’s K24 Chronograph Black Ion-Plated Stainless Steel Round Watch. Black ion-plated stainless steel makes up the large case and round bezel, featuring a wide-handled stem on the left side of the case. Two easy-push buttons work the time, date, and the stopwatch featured in a small subdial on the face. The dial contains multiple black pieces at various depths, showcasing the thick red hour, minute, and second hands ticking in the middle. Large red Arabic numerals stand at the two, four, eight, and 10 o’clock, while small silver screws dot the three, six, nine, and 12 o’clock hours on top of small numerals at every five minutes. Small numerals sit in five-minute intervals. A subdial sits just below the hands for the stopwatch, and a small calendar display curves by a line of minute marks next to the nine o’clock hour. There are two band options: one of black rubber with a deployment clasp, and one of black leather that closes with a silver buckle. This original timepiece boasts the reliability of Japanese quartz movement and is water resistant up to 330 feet (100 meters).

Welder Men’s K24-3303 K24 Chronograph Black Ion-Plated Stainless Steel Round Watch

• Ergonomic handle design
• Designed especially for working and welding applications
• You can use it as a clamp
• Adjustable knob for wider or smaller frame sizes
• Industrial strength drop forged steel construction

Product Description
An adjustable locking plier that is designed to hold objects that you are welding, so heat doesn’t burn you or your gloves.

Black Rhino 00181 12-Inch Welding Locking Pliers

Product Description
The Weld Mount Wire Tie Mounts are ideal for primary wire and cable runs, submerged bilge wire and hose bundles, as well as securely mounting firewall and bulkhead wiring. The Weld Mount Wire Tie Mounts may be attached to virtually any surface.

Weld Mount Black Nylon Wire Tie Mounts WMS-AT-3B Small Tie Mount Black 30/PK

Product Description
Auto-Helm AH88 Series Helmets powers up by solar power, and reacts automatically when you weld in a 1/10000 second time frame. This helmet is very easy to use, you can adjust the shades that you need to use, protect your eyes, and will last for many years before replacing the solar battery. They weigh barely 1lb, so you will forget that its even on you. The wide viewing window lens is 90 x 40mm so you can see everything that you want to weld. You can use this helmet for welding with MIG, TIG, or ARC welders. Auto-Helm Helmet Darkens the Instant You Start Welding. It Adjusts from a Variable Dark Shade #9 to #13, & clears to a Light shade #4. Auto-darkening lens never needs batteries and charges with exposure to welding or sunlight (solar powered). Extra wide viewing area for better performance (extra lens available). Padded ratcheting headgear with sweatband and light weight composite body reduces user fatigue. Exceeds ANSI Z87 Standards and Protects user from UV & IR Radiation. Darkens in 1/10,000 of a second and best of all, it has a shade adjustment control inside the helmet where it won’t accidentally get knocked out of adjustment, which means no surprises. Color is Black.

Auto-Helm AH88BK Pro Series Auto Darkening Welding Helmet Black

• Premium solar powered welding helmet with unique designs
• Auto-darkening lens responds in 1/25000 seconds, shades can be switched continuously from shades 9-1
• UV and IR protection are in compliance with EN169 standards for welding filters
• Design and construction meet ANSI Z87.1 standards for eye protection devices, two-way adjustable hea
• Solar rechargeable lithium battery

Product Description
Premium solar powered welding helmet that comes with three unique designs. These helmets fully meet industry standards: auto-darkening lens responds in 1/25000 seconds, darkens when welding begins and clears when welding stops, shades can be switched easily and continuously between shades from 9 to 13 with 1/10000 seconds reaction time, UV and IR protection are in compliance with EN169 standards for welding filters, and the design and construction meet ANSI Z87.1 standards for eye protection devices. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The unique designs make them more than great welding helmets.

Neiko Auto Darkening Solar Powered Welding Helmet – ANSI Approved, American Eagle Design with Polished Black Finish

• Oversized date watch with three dimensional dial, designed by Italo Fontana
• Comes with one rubber strap and one leather strap; durable mineral crystal
• Date function
• Comes with Welder’s trademark water-tight suitcase
• Water Resistant to 330 feet (100 M)

Product Description
Movement: 2115 Miyota Case: Steel; AISI 316L; IPB Treatment Case Dimensions: Approx. 48mm diameter; approx. 60mm width with crown Mineral Crystal Black Dial with Green Accents Date Display Water resistant: 5 ATM Bands: 2; Black Calf Leather; & Black Rubber Guarantee: 2 years worldwide

Welder Men’s K24 Analog Black Ion-Plated Stainless Steel Round Watch #K24-3102