Welder World Blog

Archive for the ‘Welding Schools In Houston Texas’ Category

The 20ft shipping containers were available more than 50 years ago. The first containers were used to send goods in metal boxes that could be loaded and unloaded by crane. The first businessman to load a ship with several dozens of 35ft shipping containers was Malcolm Mclean, a North Carolina resident.

His route was Newark, New Jersey to Houston, Texas. A shipping container is made up of a body with bottom, top, and side walls having upper and lower horizontal hollow chords. Each of these chords has an opening at the bottom and top. To allow runoff of dirt and water, it has interior baffles sloped downward.

Generally, the cargo container is made with closed-top dry vessels from aluminum, plastic, plywood, fiberglass, steel or a combination of these materials. The hinged rear door allows for stowing and unstowing of cargo.

Today’s shipping containers are made in many ways. Some are made from 14 gauge steel with an exterior dimension of 20×8.5×8, which makes them an ideal onsite storage unit. Containers are made in several sizes like 20, 30, or 40 feet long with a height of 8, 8.5, and 9 feet.

A 20ft shipping container is designed to store and carry anything. It is ideal for short or long-term choice of storage units for building supplies, commercial use, and home use. A 40-ft shipping container does not have pockets. All containers’ bottoms walls have u-shaped horizontal beams found midway along the length of the wall and extending downward.

The walls have a top with one aperture and many baffles are seen along the beam. These baffles extend outward from the side toward the opposite sidewall, and stop at spaced intervals from the wall.

Shipping containers made from steel have corrugated walls welded to the top, end frames, and bottom side rails. Found on the container’s 8 corners are steel castings served as the end frames and welded to 4 corner posts. Their roofs may be made of corrugated sheet steel or flat sheet steel.

Supporting the roof structure are the interior bows. The plymetal doors are fitted with anti-rack and locking hardware and weatherproof seals. The floor is made of wood laminate, plywood or planking screwed to the cross pieces.

Containers made from aluminum are fitted with steel. The parts of the containers with steel materials are the end frames and side rails. The interior and exterior posts with sheet aluminum make up its walls which are riveted to the posts. Plywood lined the internal walls and roof bows which are welded to the top rails, bolted, or riveted, are made of aluminum.

Fiber-reinforced polymer, FRP, is another material used in making shipping containers. In this material, the container is framed in steel with FRP panels fitted on the wall sides, roof, and front-end wall. There are no roof bows to support the roof structure. However to make them waterproof, it is coated in mastic.

20 ft shipping containers are known for their strength and durability, modular elements, transportability, availability, and cost-efficiency. Today, they are used to construct apartments, studio rooms, school campus apartment, offices, classrooms, and villages.

Annual underwater welding/burning seminar for high school teachers & instructors. Held at The Ocean Corporation in Texas. These highlights are from Wet Welding 2007 held June ’07. High school teachers and instructors from around the country traveled to Houston to suit up in professional dive gear then weld/burn underwater. Attendees can look for themselves in this video. For more information call 1.800.321.0298
Video Rating: 4 / 5

When people don’t want to study for four years to get a job, there are always other places of learning. These institutions provide career advancement through hands on training that is needed in today’s workforce.

One of these places is the Texas Vocational School also known as TVS located in Victoria. There are only a few programs available for people to choose namely business, paralegal and welding.

Those who have a fascination for airplanes can try Redstone Institute in Houston that offers a diploma in airframe and power plant. People who graduate can work as part of the maintenance crew of one of the major air carriers in the United States or even abroad.

Everest College in Fort Worth, Texas offers the student business administration, medical billing or assisting, pharmacy technician and paralegal. The person will just fill the application form so that a brochure can be delivered to the home.

Women can also do well in a vocational school as the Milan Institute of Cosmetology in San Antonio offers people the opportunity to become a manicurist, a cosmetologist or an instructor that will teach people how to beautify the face.

People who are unable to go to campus during the day will be happy to know that evening classes are being offered. Some of these schools offer a ,000 scholarship for qualified students so those who are interested should fill up the application form.

Not everybody may be able to avail of the scholarship due to budget constraints. Those who would still like to enroll can try getting a Federal Pell Grant or aid from such organizations such as the Texas Commission for the Blind and the Texas Rehabilitation Commission among others.

People who graduate from any of these vocational schools will not have difficulty in getting a job. This is because the Texas Workforce Commission and the Proprietary Schools Section accredit most of the programs being offered.

Students who are interested in enrolling in one of the programs should have a high school diploma and passed the General Education Development Test or GED. Those who haven’t can take the entrance exam instead.

After this first step, the applicant will have to take a personal interview conducted by the administrator or by another representative from the school. This person will serve as a counselor in focusing on the program of study that will help attain the student’s long-term goals.

Commercial diving and underwater welding techniques performed at annual seminar in Houston, Texas. Visit us @oceancorp.com This two day seminar educates high school teachers & instructors about commercial diving and underwater welding techniques. For more information call 800.321.0298
Video Rating: 4 / 5