Welder World Blog

Archive for May, 2011

How to think creative logo design creative ideas?

A creative logo designer will need a computer, digital camera, printer, and design software to get started. But outside of these expenditures, start-up costs are minimal, as are the ongoing fixed overheads to operate the business because the designer can work from home and the majority of jobs can be serviced using e-mail and fax. The better known the designer become for the incredible design work and logos that perfectly describe what they represent, and the more well-known the customers are, the higher the fees will go.

There are many composition techniques that the designer can use to help the designer to generate the logo design creative ideas.

The first creative ideas that the designer think of are not usually the most original. The reason they are already in the imagination is because the designer have seen them before in some form or other.

The best logo design creative ideas are those that the designer discovers by trial and error through composing the images from the investigation.

There are many composition techniques that the designer can use to help the designer to generate the logo design creative ideas.

Techniques, such as welding, tiling, subtraction, layering and framing the images often give rise to creative ideas with more subtle layers of meaning.

When bringing the creative logo design idea to life, the designer want to make sure this is done the right way; using the technical experience of a design firm specifically geared for inventors. This means using mechanical engineers, industrial designers and a company like Design My Creative idea which always remembers the designer are trying to get the creative logo design to market. This keeps the creative logo design consistent by using a single company, making the invention more professional and marketable.

In conclusion we can say that regardless of where the designer are in the design process, save time and money by ensuring that the creative logo design, packaging design, branding and website are created by the use of a creative design idea. Companies usually act as the designer’s silent partner throughout the entire process, taking no royalties and allowing the designer to retain control of all aspects of the invention. The services are clearly defined and our desire to work with the designer every step of the way ensures the designer’s invention’s utmost potential. We at creative logo design truly reaches the clients with success, with the belief that the more successful the designer are, the inventor, the more successful we, the designers product design firm will be as well.

Metal inert gas welders are semi automatic and in some case, automatic welding processes used to weld cracks and tears on a metallic surface.  A continuous voltage and a direct current source of power is used along with an alternating current.

High quality MIG welders are up for sale during the season and some store even offer a whole lot of discounts and other bargains on the deals. It is a perfect time to buy mig welders during the season as one is also better informed of the latest technological developments in the sector. During the sale period, many companies, old and new display their latest models and educate the technicians and other buyers on the qualities of their latest offerings. Some companies even show extensive demonstrations on cars and other automobiles to prove their point. This is also the time where you can get you automobile repaired for free if you are buying a welder. This policy was started lately and has been popular ever since. In fact t has also boosted the sales of mig welders. Both the seller and buyer are happy and satisfied with the outcome. During the sale of such mig welders, workshops are held in various parts of the town to educate and enrich the knowledge of new and old technicians. It becomes the good platform for displaying one’s talent with the welding machine. There are also competitions for such purposes.

Mig welders are also sold online and have become a very popular method for the sale and purchase of these welders. The online welder vendors offer great discounts and the prices are competitively placed. You can also compare the prices and qualities of two mig welders of different or the same company on the website and make your decision in a well informed manner. Most online companies send you their advertisements via the email or even through personal cell phone messages and instant internet messaging. You can respond by clicking the websites they have listed in the email, message or advert pop up. You come to the landing page and from there onwards can look at the plethora of options provided to you by the company. You can look at all the models from all the possible angles and can enquire through live chat from the executives about the details of the model. After you have shown sufficient interest, you will be invited to look at the models and then can place your order either at that time or over the internet.

Wear long sleeves & pants, plus full shoes, & at least a helmet.

If I’m doing overhead welding, I’ll put on my leather jacket too. I ALWAYS wear long sleeves. I ALWAYS wear the helmet for welding or the goggles for torch work.

Wearing short sleeves will get you sunburned. Not wearing gloves can get your hands burned or sunburned. Yes I’ve tried it during real hot weather, & the sunburn is for REAL.

If you wear boots, don’t tuck your pants inside! One of my welder helpers did & he soon went DANCING around due to the hot sparks. We both laughed about it later, but it wasn’t funny at the time.

Got long hair? You better keep it back or cut it shorter. The guy mentioned above had fairly long hair at one time. Then he caught it on fire while doing torch work. Hair can burn REALLY fast. He came to work the next day with a lot shorter hair!

Doing some necessary work in wet conditions? Try to build a temporary shelter, or make sure you have on DRY gloves, etc. If conditions are wet enough, get some rubber WELDING gloves.

Protective clothing is a MAJOR part of Welding Safety!

Fire Safety:

I don’t start welding until I have at LEAST a bucket of water nearby. It’s good to also have a water hose & any pressurized fire fighting equipment if you have them.

Learn to know the SMELL of burning clothing & other items around the job. Have a “helper” around to watch for fires when possible. Learn to pay attention to unusual LIGHT flickering in your side vision. You may even HEAR a burning sound besides the arc sounds.

Sooner or later, something will catch fire. Catch it before it gets out of hand. People everywhere, everyday, weld by themselves. Don’t, unless you don’t have a choice.

When it comes to Welding Safety, PREVENTION SAVES PAIN!
Arc welding safety with your equipment:

1) Skin burns: Simple. Wear clothing wherever you don’t want to get burned. The ARC is hot, & the metal you’re working on is too. If you feel your leather glove getting hot, let go of the metal & remove the glove! It WILL get hotter.

Welding sparks can set your clothing on fire. It can be burning BEFORE you smell it. Keep checking yourself & your surroundings.

Metal you’ve just welded will STAY hot for awhile. Use your gloves to move it.

2) Ventilation: Open the garage door, turn on a fan, & keep “up-wind” of the fumes. Don’t weld forever without taking breaks & getting to fresh air.

3) Shocks: Start your weld on the same side of the material where the ground clamp is. It will start easier & you won’t become part of the electrical path. Use DRY GLOVES, & try to not work in wet areas.

If you MUST work in wet areas, you can use rubber WELDING gloves. They are very heavy duty. If you’re stick welding (versus wire welding), you may get a jolt when you insert the rod into the holder with wet leather gloves.

4) “Flash burns”: Even looking at the sun for a second or so can HURT. If you see the arc directly without protection for long, you will have the equivalent of sun-burned EYES! If you don’t get it too bad, it will go away shortly.

If you get “flashed” very much it will hurt for a long time. I got it bad once & had to go to a doctor to get medicine to put in my eyes. It was called “pontocaine”. It worked INSTANTLY, & what a relief!

Also, be kind to those around you & tell them to “watch their eyes”. When I was still new to welding, they called me “Lightning” because I wasn’t warning them before striking an arc.

You need to read these WELDING SAFETY DETAILS more than once!

Torch safety

1) The cutting torch & related equipment can be dangerous. First, SECURE the tanks to a wall or build a cart for them & keep the chain across them. A fellow worker told me about the time he saw an oxygen tank fall & break the top valve assembly off. Then it went flying literally through the roof!

Remember, there’s up to 2000 PSI in the O2 tanks. Again, keep the tanks secure. PLUS if you’re replacing them, make sure the cap is on the full one.

2) Once you have a flame going, you will get an INSTANT BURN if you run that flame across your hand! After you make a cut, the metal will stay HOT for quite awhile. Use gloves to handle work in-progress.

3) Welders are really “Special Mechanics”, & we all get greasy. You don’t want grease catching fire. It’s extra hard to get “out”. Clean up wherever you can. A trick a mechanic friend of mine showed me, was to use margarine for my dirty hands. Use it just like you would waterless cleaners. It works really good.

Just take a teaspoon (or tablespoon) full, and work it till it’s liquid, then rub it around the grime, then wipe it off with paper towels. (THEN go in the house & use regular soap to get the margarine off). Your wife will love you for not coming in totally greasy!

4) Keep all fittings tight. If the “gas” fittings are loose enough, it could catch fire AT that fitting.

5) Don’t lay the acetylene tank flat for transport, because it could become explosive the next time you turn it on & light it up.

6) When opening the acetylene tank valve, just turn it 1/2 turn. It makes everything safer.

7) Use goggles to cut or weld. Yes there are those that don’t, but I hope it won’t be YOU!

Keep your goggle lenses clean. I use my leather gloves to do that, & leather works just fine.

9) If you’re “setting the flame”, & the “gas” separates from the tip, just back off the “gas” valve a bit.

10) If your hear a buzzing, sucking noise, immediately turn the “gas” valve off, then the O2. It may be backing up into the hoses & could be a bad thing.

11) Check the whole area before you cut. Clear out gas cans, etc. And look for items that might catch fire. Also, bring out the water buckets, water hoses, & other pressurized fire fighting equipment. And have someone nearby, if possible to be the “fire-watch”.

12) “Crack open” the main tank valves before you hook them to hoses to make sure there’s no contamination.

13) Don’t tuck in your pant legs, or you’ll be dancing & jumping around if enough sparks get inside the boots! I’ve seen a fellow welder doing exactly that.

14) Break out your steel-toed shoes if you’re going to do any heavy cutting. One day I just happened to look down & noticed a DENT in my shoe toe. I didn’t even know it happened until I SAW it.

The next time you start a welding project, think to yourself, ” What have I told my buddy helping me about Welding Safety?”

Equipment Gone Bad:

Note that some equipment failures can be just “a pain”, but others might be a safety problem. Try to keep your equipment clean & working right:

1) If your arc welder overheats too much it could either be a “goner”, or even cause it to start smoking internally. Pay attention to “duty cycle”, especially if your machine has no cooling fan or a warning mechanism: a warning light or an automatic breaker.

I was welding along at home & noticed that the rod was sticking a lot to the work-piece. And I noticed that it SOUNDED different suddenly. I soon realized that my cooling fan had died. I replaced it, & it’s been working fine for years now.

2) Can’t see what you’re doing very well? Check your lenses & clean them on both sides (use your leather glove).

3) The circuit breaker kicking off? Maybe you need to go to a bigger breaker. Plus you might have to use a smaller rod & make more “passes”.

4) Is your helmet lens getting messed up from hot sparks? Add a protective cover lens (they are cheaper than your main lens).

5) Is the torch doing excessive splattering? You may be getting the tip too close to the puddle, or the cut. Or you might just need to use tip cleaners (or have both problems).

6) Is your torch not cutting very well? If you have the smaller (& cheaper) single stage gauges, you might try cranking up the cutting pressure again. This was going on for my single stage outfit, & I just assumed I was real low on acetylene.

But when I shut off the tanks later, I saw that the O2 cutting pressure reading was still at 20 PSI. So I was only using 20 PSI to cut instead of 40! I pulled the gauge’s needle off & re-set it. It was good to go again.

Welding Safety includes safe equipment and safe usage!

Welding Safety MEANS safety for you AND your customer AND those helping you!!

Related Welding Lenses Articles

Wear long sleeves & pants, plus full shoes, & at least a helmet.

If I’m doing overhead welding, I’ll put on my leather jacket too. I ALWAYS wear long sleeves. I ALWAYS wear the helmet for welding or the goggles for torch work.

Wearing short sleeves will get you sunburned. Not wearing gloves can get your hands burned or sunburned. Yes I’ve tried it during real hot weather, & the sunburn is for REAL.

If you wear boots, don’t tuck your pants inside! One of my welder helpers did & he soon went DANCING around due to the hot sparks. We both laughed about it later, but it wasn’t funny at the time.

Got long hair? You better keep it back or cut it shorter. The guy mentioned above had fairly long hair at one time. Then he caught it on fire while doing torch work. Hair can burn REALLY fast. He came to work the next day with a lot shorter hair!

Doing some necessary work in wet conditions? Try to build a temporary shelter, or make sure you have on DRY gloves, etc. If conditions are wet enough, get some rubber WELDING gloves.

Protective clothing is a MAJOR part of Welding Safety!

Fire Safety:

I don’t start welding until I have at LEAST a bucket of water nearby. It’s good to also have a water hose & any pressurized fire fighting equipment if you have them.

Learn to know the SMELL of burning clothing & other items around the job. Have a “helper” around to watch for fires when possible. Learn to pay attention to unusual LIGHT flickering in your side vision. You may even HEAR a burning sound besides the arc sounds.

Sooner or later, something will catch fire. Catch it before it gets out of hand. People everywhere, everyday, weld by themselves. Don’t, unless you don’t have a choice.

When it comes to Welding Safety, PREVENTION SAVES PAIN!
Arc welding safety with your equipment:

1) Skin burns: Simple. Wear clothing wherever you don’t want to get burned. The ARC is hot, & the metal you’re working on is too. If you feel your leather glove getting hot, let go of the metal & remove the glove! It WILL get hotter.

Welding sparks can set your clothing on fire. It can be burning BEFORE you smell it. Keep checking yourself & your surroundings.

Metal you’ve just welded will STAY hot for awhile. Use your gloves to move it.

2) Ventilation: Open the garage door, turn on a fan, & keep “up-wind” of the fumes. Don’t weld forever without taking breaks & getting to fresh air.

3) Shocks: Start your weld on the same side of the material where the ground clamp is. It will start easier & you won’t become part of the electrical path. Use DRY GLOVES, & try to not work in wet areas.

If you MUST work in wet areas, you can use rubber WELDING gloves. They are very heavy duty. If you’re stick welding (versus wire welding), you may get a jolt when you insert the rod into the holder with wet leather gloves.

4) “Flash burns”: Even looking at the sun for a second or so can HURT. If you see the arc directly without protection for long, you will have the equivalent of sun-burned EYES! If you don’t get it too bad, it will go away shortly.

If you get “flashed” very much it will hurt for a long time. I got it bad once & had to go to a doctor to get medicine to put in my eyes. It was called “pontocaine”. It worked INSTANTLY, & what a relief!

Also, be kind to those around you & tell them to “watch their eyes”. When I was still new to welding, they called me “Lightning” because I wasn’t warning them before striking an arc.

You need to read these WELDING SAFETY DETAILS more than once!

Torch safety

1) The cutting torch & related equipment can be dangerous. First, SECURE the tanks to a wall or build a cart for them & keep the chain across them. A fellow worker told me about the time he saw an oxygen tank fall & break the top valve assembly off. Then it went flying literally through the roof!

Remember, there’s up to 2000 PSI in the O2 tanks. Again, keep the tanks secure. PLUS if you’re replacing them, make sure the cap is on the full one.

2) Once you have a flame going, you will get an INSTANT BURN if you run that flame across your hand! After you make a cut, the metal will stay HOT for quite awhile. Use gloves to handle work in-progress.

3) Welders are really “Special Mechanics”, & we all get greasy. You don’t want grease catching fire. It’s extra hard to get “out”. Clean up wherever you can. A trick a mechanic friend of mine showed me, was to use margarine for my dirty hands. Use it just like you would waterless cleaners. It works really good.

Just take a teaspoon (or tablespoon) full, and work it till it’s liquid, then rub it around the grime, then wipe it off with paper towels. (THEN go in the house & use regular soap to get the margarine off). Your wife will love you for not coming in totally greasy!

4) Keep all fittings tight. If the “gas” fittings are loose enough, it could catch fire AT that fitting.

5) Don’t lay the acetylene tank flat for transport, because it could become explosive the next time you turn it on & light it up.

6) When opening the acetylene tank valve, just turn it 1/2 turn. It makes everything safer.

7) Use goggles to cut or weld. Yes there are those that don’t, but I hope it won’t be YOU!

Keep your goggle lenses clean. I use my leather gloves to do that, & leather works just fine.

9) If you’re “setting the flame”, & the “gas” separates from the tip, just back off the “gas” valve a bit.

10) If your hear a buzzing, sucking noise, immediately turn the “gas” valve off, then the O2. It may be backing up into the hoses & could be a bad thing.

11) Check the whole area before you cut. Clear out gas cans, etc. And look for items that might catch fire. Also, bring out the water buckets, water hoses, & other pressurized fire fighting equipment. And have someone nearby, if possible to be the “fire-watch”.

12) “Crack open” the main tank valves before you hook them to hoses to make sure there’s no contamination.

13) Don’t tuck in your pant legs, or you’ll be dancing & jumping around if enough sparks get inside the boots! I’ve seen a fellow welder doing exactly that.

14) Break out your steel-toed shoes if you’re going to do any heavy cutting. One day I just happened to look down & noticed a DENT in my shoe toe. I didn’t even know it happened until I SAW it.

The next time you start a welding project, think to yourself, ” What have I told my buddy helping me about Welding Safety?”

Equipment Gone Bad:

Note that some equipment failures can be just “a pain”, but others might be a safety problem. Try to keep your equipment clean & working right:

1) If your arc welder overheats too much it could either be a “goner”, or even cause it to start smoking internally. Pay attention to “duty cycle”, especially if your machine has no cooling fan or a warning mechanism: a warning light or an automatic breaker.

I was welding along at home & noticed that the rod was sticking a lot to the work-piece. And I noticed that it SOUNDED different suddenly. I soon realized that my cooling fan had died. I replaced it, & it’s been working fine for years now.

2) Can’t see what you’re doing very well? Check your lenses & clean them on both sides (use your leather glove).

3) The circuit breaker kicking off? Maybe you need to go to a bigger breaker. Plus you might have to use a smaller rod & make more “passes”.

4) Is your helmet lens getting messed up from hot sparks? Add a protective cover lens (they are cheaper than your main lens).

5) Is the torch doing excessive splattering? You may be getting the tip too close to the puddle, or the cut. Or you might just need to use tip cleaners (or have both problems).

6) Is your torch not cutting very well? If you have the smaller (& cheaper) single stage gauges, you might try cranking up the cutting pressure again. This was going on for my single stage outfit, & I just assumed I was real low on acetylene.

But when I shut off the tanks later, I saw that the O2 cutting pressure reading was still at 20 PSI. So I was only using 20 PSI to cut instead of 40! I pulled the gauge’s needle off & re-set it. It was good to go again.

Welding Safety includes safe equipment and safe usage!

Welding Safety MEANS safety for you AND your customer AND those helping you!!

Related Welding Lenses Articles

Welders are used when there is shortage in electric power supply. Various types of Welders are used. Engine-driven welders are very popular of the genre. This type of systems is used for outdoor applications. But engine-driven welders are designed in such a way so that it can be used for indoor applications. At times when there is problem in supplying power to electric (plug-in) welders, this type of technology is used. These indoor circumstances include everything from major plant shutdowns to minor repair jobs. It is better to use the engine-driven welders in a large space that has good ventilation. There are some basic things that need to be taken into considerations while selecting an engine-driven welder. These include:

1. Application- First of all you have to consider this factor. You have to define the application and then select the welding process.

2. Engine Type – It is one of the most important issues that you need to look at after defining the application. Before you take any definite decision ad select the welder, it is better on your part to check the engine type. It is truly one of the most crucial steps that you need to take. LPG (liquid propane gas), gasoline or diesels are the main options. You can get better fuel economy with the diesel engine option compared to the gasoline engine. Another positive side of diesel fuel is that it does not catch fire as easily as the gasoline. Refineries prefer to select diesel-fueled machines over gasoline fueled machines. Another important thing to consider is whether or not the fuel is supplied at the site. Diesel is the common choice. But the decision is taken on the cost saving factors. There is a great thing about the gasoline. I cold weather situations, gasoline engines are preferred. They take less time to start compared to other fuel options. They work without the aid of extra starting equipments, such as winterized fuel or ether start kits. LPG is another fuel option but it is not so popular. It is selected only when there is no gasoline or diesel. It is also used in case the other two options are not allowed for indoor applications.

3. Portability is another very crucial issue that is considered while selecting a welder. There are many areas where taking large welders can be a big issue. In such cases, easily portable welders are a great option.

So make sure you exercise your discretion and select a welder as per your needs and requirements.