«
»

J-B Weld 8267-S STIK

  • Requires no tools or “prep time”
  • Makes no mess
  • Works on wet and dry surfaces
  • Simple and easy to use
  • Plugs holes and makes permanent repairs

Product Description
J-B Weld is a hand kneadable, steel-reinforced epoxy putty adhesive/sealant that will plug holes and make permanent repairs on wet and dry surfaces. It will even cure completely submerged in water or gasoline! Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply. J-B Stik will fully cure in 20-30 minutes and can be drilled, sanded, filed, tapped, machined, and painted.

J-B Weld 8267-S STIK

Posted in Weld | Tags: , , , , , , ,

5 Responses to “J-B Weld 8267-S STIK”

  • Michael M. DeSimone:
    July 17, 2010 at 5:54 pm

    I’m not into bondage, and , alas, neither is this epoxy putty. I was attempting to bond plastic to metal. I followed the directions, let it set overnight, but the bond came apart after a few hours. If it’s not meant to bond plastic to metal, mea culpa. Otherwise, I cannot recommend this product.
    Rating: 1 / 5

  • Ellen Dean:
    July 17, 2010 at 8:05 pm

    Unfortunately this product did not fix my dripping pipe.Now I have to figure how to get it off the pipe,so that I can replace it,
    Rating: 2 / 5

  • P. Mehta:
    July 17, 2010 at 10:38 pm

    This was a great buy! the handle to our microwave somehow snapped off… we figured we’d try to fix it before running out and dropping a few hundred on a new microwave. the JB stik worked like a CHARM. we let it sit on the handle over night and by the following morning it was sealed on tight. Ever since we’ve used this product around the house and ALL great results! this is a MUST BUY.
    Rating: 5 / 5

  • Scott H.:
    July 17, 2010 at 11:03 pm

    I have used JB Weld for many years in its two part liquid form with excellent results. The paste worked great as well! Easy to mix, save what you don’t use.
    Rating: 5 / 5

  • Neetu Samuel:
    July 18, 2010 at 2:01 am

    I was looking for a product to fix a knob that had been previously screwed into my desk. It unscrewed itself as we used it, but the geniuses that designed the desk installed a drawer organizer(seems to be glued in) just behind the front panel of the drawer so i wasn’t able to get to the screw that held the knob in.

    this product was really easy to use and it’s still working after 1 month.

    only downside is that it’s not as clean looking as it was before, there’s a small amount of the adhesive around the base of the knob, but it’s barely noticeable. I’m just glad i have a knob on the drawer face!

    Rating: 4 / 5

Leave a Reply

You must be logged in to post a comment.

Welder World News Blogy
Copyright © 2009 Welder World Blog. All Rights Reserved.